619
edits
Changes
==Features==
{| class="wikitable"
|-
|'''For use with''' || Raspberry Pi 5 Model B
|-
| '''UPS Output''' ||
* Built for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi systems
* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
* Power the Pi directly through the 40-pin header, eliminating the need for cables and soldering
|-
| '''Battery Charging''' ||
* Supports battery charging with a capacity of 1500mA
* Battery charging control can be managed via GPIO
* Provides protection against battery overcurrent and overvoltage
* Built-in protection against reverse connection of battery cells
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
* Features a single 21700 battery holder, supporting battery of up to 5000mAh
|-
|'''Power Input'''||
* Supports Power over Ethernet (PoE) input capability
* Provides up to 5A output current, enabling 1.5A charging while powering the system
* Standard Compliance: IEEE 802.3af & 802.3at (PoE+)
* Fully isolated switched-mode power supply (SMPS) topology
* Simplified single-cable installation and robust power delivery for Raspberry Pi
* Compatible with Raspberry Pi USB-C Power Supply
|-
|'''Enhanced Power Management'''||
* Seamless power switching between backup power and power adapter
* On-board push button performs the same actions as the Pi's power button
* Automatically cuts off power when the Pi is shut down
* On-board LED indicates power status and Pi detection
* AC power loss and power adapter failure detection via GPIO
* Auto power-on when power is applied or restored
* Automatic safe shutdown when battery voltage is low (programmable)
* Ultra-low standby power consumption to maximize battery life
* Advanced system power-path management to minimize frequent charging and discharging of batteries
|-
|'''Compatible Accessories'''||
* [[X1002]] single NVMe shield for Pi5
* [[X1005]] dual NVMe shield for Pi5
* [[X1006]] PCIe to SATA 2.5 HDD+M.2 SSD shield for Pi 5
* [[X1007]] PCIe to dual SATA 2.5 HDD/SSD shield for Pi 5
* [[X1100]] USB3 to SATA 2.5 HDD/SSD shield for Pi 5
* Other add-on boards are attached to the bottom of the Raspberry Pi
|-
| '''Notes''' ||
* <span style="color:red"> '''DON'T apply''' power to your Raspberry Pi 5 via the Type-C USB socket.</span>
* <span style="color:red">Compatible with unprotected 21700 battery only (Max. length: 70.3 mm).
|}
==Technical specification==