Changes

* '''⚠''' <span class="tb_red">You must The default charging current is set to 1.5A and charge cut-off voltage is 4.23V. before installing your battery in the UPS board, Please carefully confirm the maximum charging current and voltage, exceeding the upper limit of the charging specification that the battery can withstand will not only cause adverse reactions, but may also cause irreversible damage. '''⚠''' <span class="tb_red">It is essential to read and understand these safety instructions and warnings before charging your batteries. * '''⚠''' <span class="tb_red">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the instructions below instructions may result in fire, personal injury , and damage to property if charged or used improperly. * '''⚠''' <span class="tb_red">Never make a wrong polarity connection when charging and or discharging battery packs. Always double -check the polarity of the battery's connector to make sure ensure that "+" is connected to "+" and "-" is connected to "-". * '''⚠''' <span class="tb_red">Do not mix and use old batteries and with new batteries, or batteries with different brand names. * '''⚠''' <span class="tb_red">Lithium batteries has it's have a limited cycle life, please . Please replace old battery batteries with new one ones when it reaches it's they reach their service life or when it is they are two year years old, whichever comes first. * '''⚠''' <span class="tb_red">When charging the Battery Pack, please put place the battery in a fire proof fireproof container. Please don't Do not leave the UPS shield on the wood material or carpet and unattended. '''⚠''' <span class="tb_red">Keep the UPS shield away from children to ensure their safety.