[[File:X15-F1-IMG-9589.jpg|thumb|right]]
[[File:X15-F1-IMG-9590.jpg|thumb|right]]
==Overview== The X15-F1 is an advanced active cooling module specifically designed for X15xx-series CM5 I/O boards while maintaining full compatibility with existing Raspberry Pi cooling solutions. It integrates an 80×80mm PWM-programmable fan delivering adjustable airflow up to 19.68 CFM (0.56 m³/min), ensuring optimal thermal performance for Compute Module 5 systems under sustained high-load conditions.'''Please Note:''' The 40-pin GPIO header becomes inaccessible after installation. ==Features==* Excellent cooling performance: 80×80mm PWM-controlled fan with 19.68 CFM max airflow, 8x greater airflow than the Raspberry Pi IO case fan, Real-time speed adjustment for dynamic thermal management.* Easy installation: Dedicated fan bracket board that enables seamless installation above the I/O boards, Zero-interference design with Raspberry Pi heatsinks/coolers. * Industrial-Grade Reliability: Stable operation under continuous full load, Vibration-resistant mounting system. ==Specification==
* Operating voltage:5V DC (4.5 – 5.5V) supplied via four-pin fan header on a carrier board
*
* Start voltage:≥ 3.5V
*
* Power consumption:0.8W
*
* Rated current:0.16 ± 0.02A
* * Fan speed control:Pulse width modulation control with tachometer*
* Maximum fan speed:2500 RPM ± 10%
*
* Maximum airflow:19.68 CFM
*
* Noise:26.3 dBA
* * Dimensions:80×80×10mm (L×W×H)*
* Cable length:70 mm
'''Please Note* Pinout:''' # The 40-pin GPIO header becomes inaccessible after installation. # # Installing an external Wi-Fi antenna on the X15-C1 case becomes challenging once the fan is installed. # # The X15-F1 cannot be installed inside the X15-C2 case.
==Packing List==
* 1 x 8010 PWM fan
* 1 x Fan X1500-A1 V1.0 bracket
* 1 x screw pack
==User Manual==
* Hardware Installation:
* How to make it work:
==FAQ==