634
edits
Changes
Jump to navigation
Jump to search
<span class="tb_red">'''Installation Tips for Since both the C519 & X1500/X1501: '''</span>heatsink and PCB holes are threaded, proper alignment and minimal spacing are crucial during assembly. Carefully align the C519 with the PCB mounting holes, press down firmly until the heatsink touches the PCB, then tighten the screws.
Since both the [[File:C519 heatsink and PCB holes are threaded, proper alignment and minimal spacing are crucial during assembly. Carefully align the C519 with the PCB mounting holes, press down firmly until the heatsink touches the PCB, then tighten the screw-IMG-9184-1-WiKi.jpg|900px]]
==Matching Case==
X1500-C1 case is designed for the raspberry pi CM5 & X1500/X1501 IO Board only, compatible with C519 heatsink.
* Case dimensions: 110 x 90 x 33 mm / 4.33 x 3.54 x 1.30 inches
<gallery>
X1500-C1-IMG-8202-Packing-List.jpg|X1500-C1 packing list
X1500-C1-IMG-9274-1.jpg|X500-C1
</gallery>
no edit summary
<span class="tb_red">For optimal performance, please use the official Raspberry Pi '''27W USB-C''' Power Supply or an alternative power supply capable of delivering '''5.1V at 5A'''. An incompatible power supply with a lower output voltage may fail to power on the system..</span>
|}
==User Manual==
* The hardware design refers to the official design, please refer to: https://datasheets.raspberrypi.com/cm5/cm5io-datasheet.pdf
* '''Hardware Installation: [https://suptronics.com/Raspberrypi/cm5/x1501-v1.0_hardware.html X1501 Hardware]''', <span class="tb_red">'''please click the left link to view it, it's very important!''' </span>
* '''How to make it work: [https://suptronics.com/Raspberrypi/cm5/x1501-v1.0_software.html X1501 Software]''', <span class="tb_red">'''please click the left link to view it, it's very important!''' </span>
* https://smarthomecircle.com/how-to-install-os-on-raspberry-pi-compute-module-5-emmc-storage
* how to flash os into cm5 emmc, Refer to the following:
#https://smarthomecircle.com/how-to-install-os-on-raspberry-pi-compute-module-5-emmc-storage
#https://www.youtube.com/watch?v=SWv-WYlHJWQ
* Configuration steps for using an external antenna:
https://www.raspberrypi.com/documentation/computers/compute-module.html#antenna
==Packing List==
[[File:X1501-IMG-9222-Packing-List-New.jpg|600px]]
==User ManualMatching Case==* Hardware Installation: According to user feedback, we have designed a metal case [[https:X1500-C1]] /[[X15-C1]] specifically for [[X1500]] /suptronics[[X1501]] IO boards.com/Raspberrypi/cm5/x1501[[X15-C1]] and [[X1500-v1C1]] have different sizes, different appearances, and the same usage.0_hardware.html X1501 Hardware]* How to make it workHere is a detailed comparison: {| class="wikitable"! Model !! Compatible with !!compatibility!!Cooler / Heatsink|-| [[https://suptronicsX15-C1]] V1.com0 ||Raspberry Pi CM5||[[X1500]]/Raspberrypi/cm5/x1501-v1.0_software.html [[X1501 Software]* https:]//smarthomecircle.com/howother low-toprofile expansion HATs||[[X15-installF1]]|-os| [[X1500-on-raspberry-pi-compute-module-5-emmc-storageC1]] ||Raspberry Pi CM5||[[X1500]]/[[X1501]]||[[C519]]|} * how to flash os into cm5 emmc'''Please note''': The metal case will shield the wifi signal, Refer to the following:so please use Ethernet when you use this case <gallery>#https://smarthomecircle.com/howX15-toC1-installIMG-os9680.jpg|X15-onC1X1500-raspberryC1-piIMG-compute9275-moduleNEW.jpg|X1500-5-emmc-storageC1#https:</gallery> ==Installation Tips for C519 & X1500/www.youtube.com/watch?vX1501==SWv-WYlHJWQ
[[File:X1501-IMG-9246-Install.jpg|900px|none|X1501]]
Installation Video: https://youtu.be/H1vgT2lrJQI
{{#ev:youtube|https://youtu.be/H1vgT2lrJQI}}
==FAQ==