6,185
edits
Changes
Jump to navigation
Jump to search
* <span style="color:red;">It is essential to read and understand these safety instructions and warnings before charging your batteries.* <span style="color:red;">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the instructions below may result in fire, personal injury, and damage to property if charged or used improperly.* <span style="color:red;">Never make a wrong polarity connection when charging or discharging battery packs. Always double-check the polarity of the battery's connector to ensure that "+" is connected to "+" and "-" is connected to "-".* <span style="color:red;">Do not mix and use old batteries with new batteries, or batteries with different brand names.* <span style="color:red;">Lithium batteries have a limited cycle life. Please replace old batteries with new ones when they reach their service life or when they are two years old, whichever comes first.* <span style="color:red;">When charging the Battery Pack, please place the battery in a fireproof container. Do not leave the {{UPS shield on wood material or carpet unattended.* <span style="color:red;">Keep the UPS shield away from children to ensure their safety.* Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebattery.com/en/* Battery Recommend for Geekworm UPS board, please refer to: [[File:NCR18650B.pdf|X728 battery recommend]]Safety Warning}}
==Safety Instructions & Warnings==
==Overview==
* X1200 Hardware: [[X1200 Hardware]]
* How to get x1200 work: [https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1200 Software]
* Low voltage warning solution for X120x Series UPS:
[[File:IMG-7278-Low-Voltage.jpg | 700px]]
* Installation Guide
[[File:007-X1200-C1-IMG-8206-installation.jpg | 700px]]
==Matching Case==
X1200-C1 is a metal case '''for Raspberry Pi 5 & X1200''' UPS Shield, it also support installing active cooler and Raspberry Pi 5 PIP PCIe to M2 NVMe Shield like [[X1001]], [[X1004]], [[X1003]], [[X1000]] and [[M901]] on the top of Raspberry Pi 5.
* Case dimensions: 90.8 x 69 x 62.8 mm / 3.57 x 2.72 x 2.47 inches
* Note: On 12 March 2025, we updated the X1200-C1 case to '''add a row of cooling holes''' on the TF card slot side to '''increase airflow and take more advantage of the Raspberry Pi 5 active heatsink'''.
<gallery>