Changes

Q: Can't boot/recognize from NVME NVMe SSD?

#Make sure your physical all hardware connections are tightproperly connected and coupled.#'''Only''' Raspberry Pi OS ('''Bookworm''') supports pciePCIe, Raspberry Pi OS bullseye is NOT supported, refer to https://www.raspberrypi.com/software/operating-systems/#Although you can also boot from an a SD card, but an Pi OS is required for the NVME ssd NVMe SSD to work for boot, DON'T forget Flash OS onto NVME NVMe SSD.#If you're flashing a fresh PI Pi OS , DON'T forget to '''ENABLE PCIe'''.#Run the '''lspci''' or '''lsblk''' command to check the Nvme NVMe SSD is recognized?.