2,960
edits
Changes
Jump to navigation
Jump to search
no edit summary
{{GD Template Impl}}
[[File:X630-A3-Compare.jpg|thumb|right|X630-A3 V1.6&V1.3&V1.2]]
[[File:X630-A3-IMG-4236.JPG|thumb|right|X630-A3 PiKVM shield]]
[[File:X630-A3-IMG-4205.jpg|thumb|right|X630-A3 v1.2 shield]]
[[File:X630-a3-IMG-6281-2.jpg|thumb|right|X630-A3 V1.6 shield]]
[[File:X630-A3-IMG-4204.jpg|thumb|right|X630-A3 PiKVM shield]]
[[File:X630-A3-IMG-4207.jpg|thumb|right|X630-A3 PiKVM shield-Rear view]]
[[File:X630-A3-V1.3-ACCE.jpg|thumb|right|X630-A3 V1.3 Packing List]]
==Overview==
PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services!
<span style="color:red;">X630-A3 is an accessory for PiKVM-A3 (Raspberry Pi 4 based KVM)，the complete kit, please refer to '''[[PiKVM]]'''</span>
==Features==
*Designed especially for PiKVM ( Raspberry Pi based KVM over IP)
*Fully compatible with PiKVM OS (refer to user manual)
*Control a server and computer using a web browser
*HDMI Full HD capture based on the TC358743 chip
*OTG Keyboard & mouse; Mass Storage Drive emulation
*Hardware Real Time Clock (RTC) with CR1220 coin battery socket
*Equipped with solidstate relays to protect RPi GPIO pins from computer and ESD spikes
*ATX control via RJ45 connector Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely
*Reserves the 10pin SH1.0 connector on X630-A3 for future I2S HDMI audio support
*Equipped with cooling fan that allows the heat from your Raspberry Pi to dissipate
==Packing List==
*1 x X630-A3 HAT Shield for PiKVM-A3
*1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
*4 x M2.5x20mm F/F Spacers
*7 x M2.5x5mm Screws
*1 x M2.5x10mm Screws
==PCB dimention==
* X630-A3 Dimensions source file (DXF): [[File:X630-A3.dxf|X630-A3 Dimensions source file (DXF)]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online
[[File:X630-a3-v1.2-pcb.png|800px]]
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[File:X630-A3-Compare.jpg|thumb|right|X630-A3 V1.6&V1.3&V1.2]]
[[File:X630-A3-IMG-4236.JPG|thumb|right|X630-A3 PiKVM shield]]
[[File:X630-A3-IMG-4205.jpg|thumb|right|X630-A3 v1.2 shield]]
[[File:X630-a3-IMG-6281-2.jpg|thumb|right|X630-A3 V1.6 shield]]
[[File:X630-A3-IMG-4204.jpg|thumb|right|X630-A3 PiKVM shield]]
[[File:X630-A3-IMG-4207.jpg|thumb|right|X630-A3 PiKVM shield-Rear view]]
[[File:X630-A3-V1.3-ACCE.jpg|thumb|right|X630-A3 V1.3 Packing List]]
==Overview==
PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services!
<span style="color:red;">X630-A3 is an accessory for PiKVM-A3 (Raspberry Pi 4 based KVM)，the complete kit, please refer to '''[[PiKVM]]'''</span>
==Features==
*Designed especially for PiKVM ( Raspberry Pi based KVM over IP)
*Fully compatible with PiKVM OS (refer to user manual)
*Control a server and computer using a web browser
*HDMI Full HD capture based on the TC358743 chip
*OTG Keyboard & mouse; Mass Storage Drive emulation
*Hardware Real Time Clock (RTC) with CR1220 coin battery socket
*Equipped with solidstate relays to protect RPi GPIO pins from computer and ESD spikes
*ATX control via RJ45 connector Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely
*Reserves the 10pin SH1.0 connector on X630-A3 for future I2S HDMI audio support
*Equipped with cooling fan that allows the heat from your Raspberry Pi to dissipate
==Packing List==
*1 x X630-A3 HAT Shield for PiKVM-A3
*1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
*4 x M2.5x20mm F/F Spacers
*7 x M2.5x5mm Screws
*1 x M2.5x10mm Screws
==PCB dimention==
* X630-A3 Dimensions source file (DXF): [[File:X630-A3.dxf|X630-A3 Dimensions source file (DXF)]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online
[[File:X630-a3-v1.2-pcb.png|800px]]
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]