5,262
edits
Changes
Jump to navigation
Jump to search
</details>
<details>
<summary>Why the device does not show the video?No Signals</summary>
<ul><li>Double-check that the video capture device is connected correctly and tightly. For the CSI bridge, this should be exactly the camera port;</li>
<li>Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard).</li>
<li>Your computer maybe enter sleep mode, please exit sleep mode</li>
<li>If your desktop only has a VGA display port, there may be no video signal when you use <b>VGA to HDMI adapter</b>, and there is no way to solve this; However, you can try to lower the resolution and restart the PC to test, but the probability of success is very low.</li>
</ul>
* Blog sharing for reference: https://www.andysblog.de/kvm-over-ip-pikvm-als-bausatz
<htmL>
<details>
<summary>Why the device does not show the video? Only display <b>No Signals</b></summary>
<ul><li>Double-check that the video capture device is connected correctly and tightly. For the CSI bridge, this should be exactly the camera port;</li>
<li>Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard).</li>
<li>Your computer maybe enter sleep mode, please exit sleep mode</li>
<li>If your desktop only has a VGA display port, there may be no video signal when you use <b>VGA to HDMI adapter</b>, and there is no way to solve this; However, you can try to lower the resolution and restart the PC to test, but the probability of success is very low.</li>
</ul>
</details>
<details>
<p>PiKVM OS does not support I2S, so it cannot be used yet.</p>
<p>The 10pin SH1.0 connector is for '''future''' I2S HDMI audio support. Once it supported, we will update the product information for detail use.</p>
</details>