5,376
edits
Changes
Jump to navigation
Jump to search
===OS download===
Refer to https://pikvm.org/download/
For Raspberry Pi 4, please use [https://files.pikvm.org/images/v3-hdmi-rpi4-box-latest.img.xz PiKVM V3 platform].
[[File:Pi4-V3-HAT.png|800px|PiKVM V3 platform]]
'''PS:'''
We recommend that you use the ''''V3 Pre-Assembled'''' version, and this image includes OLED display configuration.
But due to different RTC chips, you still need to configure RTC to make RTC work normally, please refer to the following '''FAQ#Q: How to enable RTC'''
X680
,==User Manual==
===How to installing the Operating System (CM4 without eMMC)?===
Refer to [https://www.raspberrypi.com/documentation/computers/getting-started.html#installing-the-operating-system Official installation tutorial]
===How to flash OS onto the eMMC of CM4? (CM4 with eMMC)?===
1. Short nBOOT Pin, refer to the picture below.
[[File:X680-IMG-5615-3.jpg|500px]]
2. Connect any USB 2.0 port with a Type-A to Type-A cable to your computer
3. Power the device via PWR DC Jack with 5V Power adaper
4. Then rerfer to [https://www.jeffgeerling.com/blog/2020/how-flash-raspberry-pi-os-compute-module-4-emmc-usbboot this tutorial] to flash raspberry pi OS
5. Remove the jumper of nBOOT after flashing is complete, then restart your device;
'''PS：If you use CM4 with eMMC, then SD card cannot be used.'''
===OS download===
Refer to https://pikvm.org/download/
For Raspberry Pi 4, please use [https://files.pikvm.org/images/v3-hdmi-rpi4-box-latest.img.xz PiKVM V3 platform].
[[File:Pi4-V3-HAT.png|800px|PiKVM V3 platform]]
'''PS:'''
We recommend that you use the ''''V3 Pre-Assembled'''' version, and this image includes OLED display configuration.
But due to different RTC chips, you still need to configure RTC to make RTC work normally, please refer to the following '''FAQ#Q: How to enable RTC'''
===Computers/Servers Switching===
Press to select PC1/PC2/PC3/PC4 through buttons on front panel. the corresponding LED located on the right of the button will be on if a PC is selected. the PC1 will be automatically selected when power applied or restored.
* Press the "Ctrl" twice quickly, then immediately press "4" to switch to PC4
* If your mouse cursor is not in the area of the PiKVM web interface, it is not functional
==FAQ==