5,047
edits
Changes
Jump to navigation
Jump to search
'''The PiKVM-A3 is composed of follow parts:''' [[File:IMG20220616171152-970x600.jpg|700px|RPIKVM-A3]]* '''[[X630]]''' HDMI to CSI-2 Board (for video capture)* '''[[X630-A3]]''' HAT Board (for ethernet, cooling, RTC, ATX Control power in etc)* '''[[X630-A5]]''' Adapter Board (it is installed inside the PC case, and it connect the computer motherboard and IO panel cabe of PC case))* '''[[0.96 inch OLED Shield |0.96 inch OLED]]''' (for display, Resolution: 128×64 pixel)* Ethernet Cable (TIA/EIA-568.B connection, and it's ATX control signal cable) '''Note:''' Please use the supplied USB Type-C to USB 2.0 A-Male Cable only. USB-C to USB-A cable only with DATA lines (for keyboard and mouse emulation), Using other cable might cause instability or damage to either the host PC or the Pi. We need to ensure you isolate the 5v connection between the Raspberry Pi and host PC to prevent backpower issues that can cause instability or damage to either the host PC or the Pi. Some PC case may not have HDMI port, you need to use VGA/DVI to HDMI adapter to transfer HDMI port. ===Features===* Designed especially for PiKVM ( Raspberry Pi based KVM over IP)* Fully compatible with PiKVM OS (refer to user manual)* Control a server and computer using a web browser* HDMI Full HD capture based on the TC358743 chip* OTG Keyboard & mouse; Mass Storage Drive emulation* Hardware Real Time Clock (RTC) with CR1220 coin battery socket* Equipped with solidstate relays to protect RPi GPIO pins from computer and ESD spikes* ATX control via RJ45 connector Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely* Reserves the 10pin SH1.0 connector on X630-A3 for future I2S HDMI audio support* Reserves the 4pin header & spacers for I2C OLED display===Matching Case==='''KVM-A3''': Case for Raspberry Pi 4 and PiKVM-A3, not support raspberry pi 3 B+ / 3B. [[File:KVM-A3-IMG-4402-main-2.jpg|800px]] ===Packing List===*'''1 x 0.96 inch OLED''': Resolution: 128×64 pixel, with 2 piece of M2*6 screws*'''1 x Ethernet Cable''' (Cable length: 100cm)*'''1 x X630 HDMI Refer to CSI-2 Module'''** 1 x FFC Cable(5cm length)*'''1 x X630-A3 V1.2 Expansion Board'''** 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)** 4 x M2.5x20mm F/F Spacers** 7 x M2.5x5mm Screws** 1 x M2.5x10mm Screws*'''1 x X630-A5 V1.0 Adapter Board'''** 1 x M3.5x6mm Screw** 1 x ATX Control Cable (Cable Length: 47cm / 18.50 inch)===How to Power===* Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X630-A3)* '''DON'T''' power via raspberry pi's TYPE-C port, because it is occupied as USB OTG. ===How to Cool===* For use with raspberry pi 4, [[X630-A3]] (PiKVM-A3) equipped with a active cooling fan that cool your raspberry pi;* For use with raspberry pi 4, [[X630-A8]] (PiKVM-A8 PCIe version) equipped with a active cooling fan that cool your raspberry pi;* For use with raspberry pi zero 2 w, [[X630-A4]] (PiKVM-A4) allows to use [[C296]] aluminum heatsink with your raspberry pi zero 2 w, but user need to prepare 4pcs M2.5*7mm screws yourself.
no edit summary
==PiKVM-A3==
==PiKVM-A4==
'''The PiKVM-A4 is composed of follow parts:'''