1,974
edits
Changes
Created page with "{{GD Template Impl}} thumb|right|X630-A3 PiKVM shield ==Overview== This is the PCIe KVM-A8 kit that allows user to realize a PiKVM / KVM pro..."
{{GD Template Impl}}
[[File:X630-A3-IMG-4236.JPG|thumb|right|X630-A3 PiKVM shield]]
==Overview==
This is the PCIe KVM-A8 kit that allows user to realize a [[PiKVM]] / KVM project with Raspberry Pi 4.
NO extral connection wire require, easy to assemble and use.
PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services!
<span style="color:red;">X630-A8 is an accessory for PiKVM-A8 (Raspberry Pi 4 based KVM over IP, PCIe version)，the complete kit or other PiKVM version, please refer to '''[[PiKVM]]'''</span>
==Features==
* Designed especially for PiKVM ('''Raspberry Pi 4'''-based KVM over IP)
* Installs justs like any PCI card into a tower / desktop PC
* Fully compatiblie with PiKVM OS
* Reliable remote network access to servers and computers
* HDMI Full HD capture based on the TC358743 chip (from X630)
* OTG Keyboard & mouse; Mass Storage Drive emulation
* Hardware Real Time Clock (RTC) with CR1220 coin battery socket
* Equipped with cooling fan that allows the heat from your Raspberry Pi to dissipate
* Equipped with photocoupler to protect RPi GPIO pins from computer and ESD spikes
* '''PoE Supported''' – Power over Ethernet for simplified installation
* Also supports for powering via USB-C
* Reserves the PH2.04P connector for I2C OLED display
==Packing List==
'''* 1 x X630-A8 V1.7 Expansion Board'''
* 1 x FPC cable (Length: 5cm)
* 1 x ATX Control Cable (Length: 52cm)
* 1 x Motherboard Internal USB 2.0 9-pin Female Header to TYPE-C USB OTG Cable (Length: 50cm)
* 1 x USB3.0 IDC to TYPE-C (Length: 45cm)
* 1 x Standard height PCIe Add-in Card I/O Bracket
* 4 x M2.5x12mm F/F Spacers
* 8 x M2.5x6mm Screws
'''* 1x X630-A8-CAB V1.1 Camera Adapter board'''
* 2 x PM3x6mm Screws
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[File:X630-A3-IMG-4236.JPG|thumb|right|X630-A3 PiKVM shield]]
==Overview==
This is the PCIe KVM-A8 kit that allows user to realize a [[PiKVM]] / KVM project with Raspberry Pi 4.
NO extral connection wire require, easy to assemble and use.
PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services!
<span style="color:red;">X630-A8 is an accessory for PiKVM-A8 (Raspberry Pi 4 based KVM over IP, PCIe version)，the complete kit or other PiKVM version, please refer to '''[[PiKVM]]'''</span>
==Features==
* Designed especially for PiKVM ('''Raspberry Pi 4'''-based KVM over IP)
* Installs justs like any PCI card into a tower / desktop PC
* Fully compatiblie with PiKVM OS
* Reliable remote network access to servers and computers
* HDMI Full HD capture based on the TC358743 chip (from X630)
* OTG Keyboard & mouse; Mass Storage Drive emulation
* Hardware Real Time Clock (RTC) with CR1220 coin battery socket
* Equipped with cooling fan that allows the heat from your Raspberry Pi to dissipate
* Equipped with photocoupler to protect RPi GPIO pins from computer and ESD spikes
* '''PoE Supported''' – Power over Ethernet for simplified installation
* Also supports for powering via USB-C
* Reserves the PH2.04P connector for I2C OLED display
==Packing List==
'''* 1 x X630-A8 V1.7 Expansion Board'''
* 1 x FPC cable (Length: 5cm)
* 1 x ATX Control Cable (Length: 52cm)
* 1 x Motherboard Internal USB 2.0 9-pin Female Header to TYPE-C USB OTG Cable (Length: 50cm)
* 1 x USB3.0 IDC to TYPE-C (Length: 45cm)
* 1 x Standard height PCIe Add-in Card I/O Bracket
* 4 x M2.5x12mm F/F Spacers
* 8 x M2.5x6mm Screws
'''* 1x X630-A8-CAB V1.1 Camera Adapter board'''
* 2 x PM3x6mm Screws
<!--Add review function! -->
<comments />
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]