5,169
edits
Changes
Jump to navigation
Jump to search
145. If you need to take second image, then you will need to reboot the Raspberry Pi and execute the "raspistill" again
155. To record a video with the X630 module
167. If you need to record second video, then you will need to reboot the Raspberry Pi and execute the "raspivid" again sudo reboot <hr> '''For Hardware Reset''' - Starting RASPISTILL or RASPIVID once then reboot your Raspberry Pi Please use the following guide if your dip switch is changed to 'Hardware reset' position. 17. To take a photo with the X630 Module raspistill -o image.jpgHere, "image.jpg" is the name of your image that will be saved to your Raspberry Pi 18. If you need to take second image, then you will need to reboot the Raspberry Pi and execute the "raspistill" again. sudo reboot 19. To record a video with the X630 module raspivid -o video.h264 -t 10000Here, "video" is the name of your video and "10000" is the number of milliseconds. 20. If you need to record second video, then you will need to reboot the Raspberry Pi and execute the "raspivid" again.
no edit summary
'''For Hardware Reset''' - Starting RASPISTILL or RASPIVID once then reboot your Raspberry Pi.
==Use RASPISTILL RASPIVID ==
Only for user want to use old RASPISTILL RASPIVID commandOS before Rasberry Pi Bullseye OS.
1. Update & upgrade the raspberry pi system (It will take a long time depend on the different country)
Navigate to ''''Interfacing Options'''' and hit Enter. Now select the ''''Camera'''' option, and hit the Enter key to enable it. Select “Finish” and select to '''reboot''' your Raspberry Pi.
3. Edit /boot/config.txt to add the line (that will need sudo, and use your preferred editor'sudo nano /boot/config.txt')
dtoverlay=tc358743
to the end of the file.
Here, "image" is the name of your image that will be saved to your Raspberry Pi
sudo reboot
raspivid -o video.h264 -t 10000
Here, "video" is the name of your video and "10000" is the number of milliseconds.
sudo reboot
<comments />