2,853
edits
Changes
Jump to navigation
Jump to search
X630
,(1) If using GStreamer or PiKVM, please change to Hardware reset mode. Otherwise, the X630 won't be detected and there will be no video.
(2) For GStreamer and PiKVM, you can RESET the module via pin5 of the 10-pin functional so you can run the command to capture video & audio multiple times. Additional circuit is required. The GPIO should output high for 1second at least then output low to finish a reset. RESET should be implemented before you run the command again. [[File:An accessory board (X630-reset-sch.png|none]](3A2) An accessory board for audio capturing and & reset is being developed and will be available in Nov 2021.
(43) Currently the software reset mode can only support RASPISTILL or RASPIVID.
(54) If GStreamer is installed in Raspberry Pi OS, RASPISTILL & RASPIVID are no longer worked.