2,853
edits
Changes
Jump to navigation
Jump to search
X630
,Q: What to do if there is no video output?
A: 1. When use the PI-KVM, please set the dip switches at the back of X630 to HW mode(Hardware reset mode). Pull the HW switch to 1 and pull the SW switch to 0.(Our default mode is SW mode.)Please set the switches at power off status.(For PiKVM usage, you will need to turn off SW reset DIP switch and turn on HW reset DIP switch prior to connecting the CSI cable to your Pi4.)
2. Software reset uses GPIO 509 to reset operation through GPIO. Please refer to wiki: [[X630-Software]]
Q:Which connector model is compatible with 10pin functional connector?
A: It is SH1.0 10Pin connector.
==Match Metal Case==