6,099
edits
Changes
Jump to navigation
Jump to search
[[File:IMG_1800.jpg|thumbnail|right|Dual Micro Sd Card Adatper sku:441218]]
{{GD Template Impl}}
[[File:IMG_1811.jpg|thumbnail|right|Dual Micro Sd Card Adatper sku:441218]]
== Overview ==
Dual Micro SD card adapter; Not only for raspberry but also others
Can insert dual micro sd card;
It's convenient to use two kind of rasbpeberry pi os;
Note: Please toogle to another card via switch after your turn off your device;
[[File:IMG_1807-2.jpg|700px]]
[[File:IMG_1811-W800.jpg|700px]]
==FAQ==
Q: Why my TF card cannot be recognized? There are some errers such as 'mmc0: error -110 whilst initialising SD card'.
A:
1. Make a backup of /boot/cmdline.txt
sudo cp /boot/cmdline.txt /boot/cmdline.txt.bak
2. Edit cmdline.txt file
sudo nano /boot/cmdline.txt
#Find this word in the line '''root=PARTUUID=xxxxxxxx-xx''', then replace 'root=PARTUUID=xxxxxxxx-xx' with ''''root=/dev/mmcblk0p2''''
#(those x'es are placeholders, actually they are letters and numbers)
# Make sure that file is a single line like it was before.
3. Adding '''sdhci.debug_quirks2=4''' to the end of /boot/cmdline.txt. Keep it all on one line.
Or refer to: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=274554&sid=58e823d579fa5fcbeadde87584069ab6
[[Category: Product Manual]]
[[Category: Raspberry pi]]
<comments/>
{{GD Template Impl}}
[[File:IMG_1811.jpg|thumbnail|right|Dual Micro Sd Card Adatper sku:441218]]
== Overview ==
Dual Micro SD card adapter; Not only for raspberry but also others
Can insert dual micro sd card;
It's convenient to use two kind of rasbpeberry pi os;
Note: Please toogle to another card via switch after your turn off your device;
[[File:IMG_1807-2.jpg|700px]]
[[File:IMG_1811-W800.jpg|700px]]
==FAQ==
Q: Why my TF card cannot be recognized? There are some errers such as 'mmc0: error -110 whilst initialising SD card'.
A:
1. Make a backup of /boot/cmdline.txt
sudo cp /boot/cmdline.txt /boot/cmdline.txt.bak
2. Edit cmdline.txt file
sudo nano /boot/cmdline.txt
#Find this word in the line '''root=PARTUUID=xxxxxxxx-xx''', then replace 'root=PARTUUID=xxxxxxxx-xx' with ''''root=/dev/mmcblk0p2''''
#(those x'es are placeholders, actually they are letters and numbers)
# Make sure that file is a single line like it was before.
3. Adding '''sdhci.debug_quirks2=4''' to the end of /boot/cmdline.txt. Keep it all on one line.
Or refer to: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=274554&sid=58e823d579fa5fcbeadde87584069ab6
[[Category: Product Manual]]
[[Category: Raspberry pi]]
<comments/>