Jetson Xavier NX

From Geekworm Wiki
Jump to navigation Jump to search



Power Guide

The Jetson Xavier NX Developer Kit requires a 9−20V power supply. The 19-volt power supply packaged in the kit attaches to power jack [J16].

The Jetson Xavier NX module is designed to optimize power efficiency and supports two software-defined power modes. The default mode provides a 10W power budget for the module; the other provides a 15W budget. These power modes constrain the module to near their 10W or 15W budgets by capping the GPU and CPU frequencies and the number of online CPU cores at a pre-qualified level. See NVIDIA Jetson Linux Developer Guide for details about power modes.

CAUTION: Jetson Xavier NX is not hot-pluggable. Before installing or removing the module, the main power supply (to VDD_IN pins) must be disconnected and adequate time allowed for the various power rails to fully discharge.

User Manual

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.