-
CommentStreams:6a6c31cc38e8189fefaa6332330373bd
UPDATE!!
RETURNED the KINGSPEC nvme. It was making it so that the X1003 had NO LIGHTS illuminated.
Replaced it with a 512GB Inland TN436 NVMe M.2 Gen 4x4 SSD from amazon [WORKS even tho it has Phison E19 controller]. It arrived today, i put it in the X1003 and i had lights. I added the 6 to the end of the boot order in the eeprom. Device showed up. I ran the rpi-clone script (geerling's from his git). It went through all the glorious cloning motions.
Now i'm just working on getting the rpi5 to boot from it.
- lspci
0000:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries Device 2712 (rev 21) 0000:01:00.0 Non-Volatile memory controller: Phison Electronics Corporation PS5019-E19 PCIe4 NVMe Controller (DRAM-less) (rev 01) 0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries
NOTICE the Phison controller WORKING with this NVMe! E19