CommentStreams:1f9d8a3ea8d3d3e2a7b949743b02bb2c

Hi, I am using both slots with 1Tb SSDs. The NVME SSD is working but the system does not see the SATA SSD. Is there a special process to set this up? Are there cli commands to debug this?

Here are a few dumps.

kaza007@pinas:~ $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 29.1G 0 disk ├─mmcblk0p1 179:1 0 256M 0 part /boot └─mmcblk0p2 179:2 0 28.9G 0 part / mmcblk0boot0 179:32 0 4M 1 disk mmcblk0boot1 179:64 0 4M 1 disk nvme0n1 259:0 0 931.5G 0 disk

kaza007@pinas:~ $ lspci 00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2711 PCIe Bridge (rev 20) 01:00.0 Non-Volatile memory controller: Micron Technology Inc Device 5416 (rev 01)