Comments log
Jump to navigation
Jump to search
This is a log of comments.
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 13:49, 11 July 2024 49.49.230.163 talk posted a new comment on X1200 (I'm planning on making my own case and want to align the ports of the pi, X1200 and HAT of my choice with my design. To do this I would like to know the thickness of the X1200 PCB and the thickness of the spacers that seem to be permanently attached to the board.)
- 18:34, 10 July 2024 Lisa talk contribs posted a new comment on X735 (If both the X735 and the Raspberry Pi are powered off, there should be no voltage generated.)
- 17:50, 8 July 2024 88.217.180.33 talk posted a new comment on X735 (@Lisa Thank you for the quick reply. I know that you can power other devices with -5V by connectig them to the plug. But this was not my question. I wanted to know if a powered off Raspberry Pi will unintentionally get powered by a connected device with some voltage on the connctor pin (e.g. if the device itself is connected to a USB-Port and therefore has +5V on the pin).)
- 14:57, 8 July 2024 Lisa talk contribs posted a new comment on X735 (You can power other devices through [5V OUT] and connect them using a 2-pin cable.)
- 12:43, 8 July 2024 Lisa talk contribs posted a new comment on X306 (Hello, ①That's a jumper cap. it is used to short circuit always-on power option : 【AL ON: Short: Power always on, power button disabled】； ②If you want to use always-on power function, you need to prepare the solder pins yourself and solder it in the 【AL ON 】position and then use the jumper cap to short-【AL ON】 to enable always-on power function. please refer to X306#Updated info)
- 12:25, 8 July 2024 Lisa talk contribs posted a new comment on X1202 (Hello，X1202 only supports 18650 Flat Top batteries,please refer to X1202#FAQ---[Q: What battery is recommended for this ups shield].)
- 12:24, 8 July 2024 Lisa talk contribs deleted comment #4925 on X1202
- 12:24, 8 July 2024 Lisa talk contribs posted a new comment on X1200 (Sorry，we don't have 3D files, you can refer to ：X1200#User Manual--Dimensions source file (DXF))
- 12:23, 8 July 2024 Lisa talk contribs deleted comment #4926 on X1200
- 12:23, 8 July 2024 Lisa talk contribs posted a new comment on X1200 (Sorry，we don't have 3D files, you can refer to ：User Manual--Dimensions source file (DXF))
- 12:20, 8 July 2024 Lisa talk contribs posted a new comment on X1202 (Hello，X1202 only supports 18650 Flat Top batteries,please refer to FAQ---[Q: What battery is recommended for this ups shield].)
- 19:34, 7 July 2024 194.31.237.168 talk posted a new comment on X1200 (Good afternoon, where can I get the 3D model files to build the case? I need a Geekworm X1200 model file in SLDASM or STEP format.)
- 12:45, 7 July 2024 124.122.125.98 talk posted a new comment on X1202 (You say to not use batteries with built in protection circuit, but I want to use LiFePo4 cells. Can I use these well known cells? For safety I only use this type. What is the problem?)
- 16:01, 6 July 2024 83.63.131.222 talk posted a new comment on KVM-A3 (I purchased this model, and it seems that running the version 3 iso fails with "failed to mount LABEL=PIROOT" but running version 4 boots to the correct pikvm? I've tried multiple different SD cards and all prove the same. Was there an update to allow using of the other iso?)
- 18:50, 5 July 2024 103.61.127.161 talk posted a new comment on X306 (Hi I just bought x306 v1.3. What is the small square thing packed with screws?) Tags: Mobile web edit, Mobile edit
- 18:32, 5 July 2024 88.217.180.159 talk posted a new comment on X735 (Are the +5V outputs of the X735 V3.0 directly connected to the Raspberry Pi +5V system power or ist there a protective circuit that prevents the Raspberry Pi from accidential voltage provided by devices connected to the +5V output while the X735/Raspberry Pi is powered off?)
- 09:47, 4 July 2024 Lisa talk contribs posted a new comment on X1100 (Hi,X1100 only compatible with Pi 5. if you want to use a 2.5" SATA HDD/SSD Shield with pi 4, please refer to X825 V2.0)
- 05:14, 4 July 2024 191.57.20.109 talk posted a new comment on X1100 (Does it work with raspberry pi 4? Thanks) Tags: Mobile web edit, Mobile edit
- 15:11, 3 July 2024 Lisa talk contribs posted a new comment on X306 (Hi, Is your motherboard a Raspberry Pi Zero 2W? Please remove [Pi Zero 2W] and heatsink to test if the X306 has sound. can you please tell us the test results by email [info@geekworm.com]? and please let us know your order NO.thank you.)
- 18:16, 2 July 2024 159.224.160.123 talk posted a new comment on X306 (It comes from the bottom right corner, where type-c and Raspberry power pins are (#1 in the picture above). It's hard to say more precisely. - The board version is 1.3 - Sound exists both with and without a heatsink - I also noticed that the sound may disappear if I press down the heatsink with great power. But unfortunately screwing it hard didn't help.)
- 11:36, 2 July 2024 103.192.225.27 talk posted a new comment on How to enable OLED display (I tested it based on bookworm a few months ago and found no problems)
- 11:35, 2 July 2024 103.192.225.27 talk posted a new comment on How to enable OLED display (I tested it based on bookworm a few months ago and found no problems)
- 11:24, 2 July 2024 Harry talk contribs posted a new comment on X1202 (Hello Refer to X1202#FAQ Q1)
- 10:59, 2 July 2024 Lisa talk contribs posted a new comment on X306 (Hi,could you please tell us where the sound is coming from? Is it the X306 board or the power supply? Or is it the battery?)
- 10:49, 2 July 2024 Lisa talk contribs posted a new comment on X301 (Hello，may be a problem with some software settings, but we have not tested Ubuntu Server 22.04 yet, and we will update the wiki if we find any results.)
- 09:11, 2 July 2024 103.251.47.114 talk posted a new comment on How to enable OLED display (As per other user requests, please update these instructions and ensure compatibility with Raspberry Pi OS Debian 12 bookworm. A successful installation is not possible when following the current instructions.)
- 08:50, 2 July 2024 98.13.9.168 talk posted a new comment on X1202 (I'm getting the same thing... my screen works but my keyboard doesn't light up)
- 03:57, 2 July 2024 95.165.133.78 talk posted a new comment on X301 (Hello! I have raspberry PI Zero 2W. I in installed Ubuntu Server 22.04 on it and ETH port and USB ports are not available. is there anydditional driver for Ubuntu for x301?) Tags: Mobile web edit, Mobile edit
- 21:26, 1 July 2024 88.155.214.78 talk posted a new comment on X306 (Hi My board makes some strange low sound while connected to the charger via usb-c. When battery is charging the sound is low, and once charged I'd say the sound become lower but more intense. Is it expected? When disconnected from charger, there's no sound.)
- 15:07, 1 July 2024 Lisa talk contribs deleted comment #4906 on How to enable OLED display
- 14:53, 1 July 2024 Lisa talk contribs posted a new comment on How to enable OLED display (Hi,[python problems]----Could you please specify what the problem is?)
- 14:51, 1 July 2024 Lisa talk contribs posted a new comment on X1201 (Hi，Please note that Pi5 can only be powered by X1201. Could you please send some pictures of the installation by email [info@geekworm.com]? and tell us your order number, thank you.)
- 14:39, 1 July 2024 Lisa talk contribs posted a new comment on X1005 (Hello，X1005 not support RAID.)
- 22:29, 30 June 2024 89.187.180.33 talk posted a new comment on X1005 (Does the X1005 support RAID 0,1 ?)
- 21:00, 28 June 2024 88.134.29.9 talk posted a new comment on How to enable OLED display (Can you please update your instructions. There are many python problems)
- 13:58, 28 June 2024 47.151.250.57 talk posted a new comment on X1201 (Hi, I've got the x1201 attached to my Pi 5 and using the stock Pi 5 USB-C power supply (27W, 5V 5A). But yet when I first login the message "This power supply is not capable of supplying 5A..." is displayed in the notification area. Please advise. Thank you.)
- 12:30, 27 June 2024 182.230.201.111 talk posted a new comment on X1002 (I used hailo-8 not hailo-8L)
- 12:29, 27 June 2024 182.230.201.111 talk posted a new comment on X1002 (When I was using the hailo-8 chip and x1002, the board didn't turn on because of physical contact between the board and chip. I can see turn on properly when I'm not joining the bolt and just stick in it. If you're thinking of using the hailo-8, I'd better look into other boards. I used hailingo-8 not hailo-8L)
- 11:18, 27 June 2024 Lisa talk contribs posted a new comment on X708-A1 (Hi,X1202 UPS not compatible with X708-A1 Battery Holder.)
- 11:18, 27 June 2024 Lisa talk contribs posted a new comment on X1202 (Hi,X1202 UPS not compatible with X708-A1 Battery Holder.)
- 09:28, 27 June 2024 175.116.49.141 talk posted a new comment on X1202 (Can this be used with the X708-A1 board?)
- 08:58, 27 June 2024 175.116.49.141 talk posted a new comment on X708-A1 (Can this be used with the X1202 board?)
- 10:21, 26 June 2024 Lisa talk contribs posted a new comment on X728 (Hello, X728-hardware V1.2/1.3 version : 5V OUT： LED green on flashing indicates 5V power out and UPS powered by battery; AC FAIL：LED red on indicates AC power loss or PSU failure or PSU disconnected; Please check whether the power supply is normal to the battery and the battery charging LED light status.)
- 10:20, 26 June 2024 Lisa talk contribs deleted comment #4893 on X728
- 10:11, 26 June 2024 Lisa talk contribs posted a new comment on X728 (Hello, X728 V1.2/1.3 version :X728-hardware 5V OUT： LED green on flashing indicates 5V power out and UPS powered by battery; AC FAIL：LED red on indicates AC power loss or PSU failure or PSU disconnected)
- 04:16, 26 June 2024 89.176.154.85 talk posted a new comment on X728 (After power loss the batteries were fully discharged. After that power was restored and now LEDs 5V OUT and AC FAIL are blinking. What does it mean?)
- 16:58, 25 June 2024 125.164.16.25 talk posted a new comment on X1002 (Hi again, I'd like to ask something about WLAN connection. When I use SD card to boot, it connects to WLAN just fine. But, when I attached X1002 in, with or without SSD, with or without P580, it doesn't want to connect to my WLAN. What's wrong here? Tested before and after applying electrical tape properly (Yes the question below is mine. All holes are intact, no shorts happened between the flex cable and the case))
- 17:19, 24 June 2024 Lisa talk contribs posted a new comment on X1200 (Hi,Sorry, X1200 UPS does not support RTC wakeup.)
- 14:49, 24 June 2024 Lisa talk contribs posted a new comment on X1202 (You can consider the X-UPS1 with 12V output)
- 14:43, 24 June 2024 Lisa talk contribs posted a new comment on X708-A1 (Hi，X1203 compatible with X708-A1 battery holder. But it is not possible to install the X708-A1 under the X1203 because there are no mounting holes on the x1203 board.)