X885

From Geekworm Wiki
Revision as of 16:02, 19 November 2022 by Abby (talk | contribs)
Jump to navigation Jump to search

File:X885-Acce.jpg
X885 Packing List
X885-Mounting Hole for 3.5"/2.5" HDDs/SSDs

Overview

This X885 SuperSpeed USB to dual SATA Gen3 ports shield makes it easy to add high-capacity, high-performance external data storage to your Raspberry Pi 4.The dual SATA shield supports two 3.5” SATA hard drives with ultra-fast data transfer speeds and configurable RAID modes. This dual SATA shield delivers fast file transfer rates up to 5Gbps with USB 3.1 Gen 1 performance. It supports SATA I, II and III and is enhanced with UASP to maximize the performance and speed of your SATA III drives. The dual SATA shield provides an effective solution for Raspberry Pi4 to store, access, back up, and protect important files.

Features

  • Ideal storage solution for Raspberry Pi 4 - Dual SATA Gen3 ports Shield
  • Create high performance storage with a dual SATA HDD RAID array through USB 3.1 (5Gbps)
  • Supports Standard Desktop 3.5" SATA Hard Drives or SSD
  • Supports hard drives up to 10TB
  • Supports SATA I, II and III and is enhanced with UASP to maximize the performance and speed of your SATA III drives
  • Supports Transfer Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1)
  • Supports hardware JBOD, RAID0(striping), RAID1(mirror), Normal mode
  • Supports mode select via jumper setting
  • Plugandplay, no drivers needed
  • LED blue indicator indicates each drive status
  • Onboard push button to control power on, safe shutdown, reboot and force shutdown
  • Supports full poweroff from software
  • Onboard red LED shows the status of power on, reboot and shutdown
  • Powers the Raspberry Pi via the 40pin header - no additional cabling required
  • Speciallymade USB3.1 jumper to connect with RaspberryPi - no additional cables needed
  • Onboard PH2.0 connectors for external switch and PWM cooling fan
  • Mounting holes and standoffs provide mechanicalstability of the RaspberryPi and X885 assembly

Packing List

  • 1 x X885 V1.1 Dual 3.5" SATA HDD Shield
  • 1 x X885 A1 V1.0 Adapter
  • 1 x USB3 Jumper
  • 3x Jumper link Pitch 2.54mm
  • 4x M2.5 *11 F/F Spacers
  • 8x M2.5 *6mm Screws
  • 8x M3 *8mm Spacers

User Manual

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.