Changes

X885

1,198 bytes added, 15:44, 19 November 2022

==Features==

* Ideal storage solution for Raspberry Pi 4 - Dual SATA Gen3 ports Shield

* Create high performance storage with a dual SATA HDD RAID array through USB 3.1 (5Gbps)

* Supports Standard Desktop 3.5" SATA Hard Drives or SSD

* Supports hard drives up to 10TB

* Supports SATA I, II and III and is enhanced with UASP to maximize the performance and speed of your SATA III drives

* Supports Transfer Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1)

* Supports hardware JBOD, RAID0(striping), RAID1(mirror), Normal mode

* Supports mode select via jumper setting

* Plugandplay, no drivers needed

* LED blue indicator indicates each drive status

* Onboard push button to control power on, safe shutdown, reboot and force shutdown

* Supports full poweroff from software

* Onboard red LED shows the status of power on, reboot and shutdown

* Powers the Raspberry Pi via the 40pin header - no additional cabling required

* Speciallymade USB3.1 jumper to connect with RaspberryPi - no additional cables needed

* Onboard PH2.0 connectors for external switch and PWM cooling fan

* Mounting holes and standoffs provide mechanicalstability of the RaspberryPi and X885 assembly

==Packing List==

1,823

edits