X880-C1

From Geekworm Wiki
Jump to navigation Jump to search

X880-C1 Front
X880-C1 Back
X880-C1+X880+X880-A1-A2
X880-C1+X880+X880-A3
X880-A3
X880-A3

Overview

This X880-C1 metal case is specially designed for Raspberry Pi 4 Model B with X880 V1.1 12V Dual SATA Gen3 HDD shield & X880-A1-A2 board, it is also support to use with X880 V1.1 board to match with X880-A3 acrylic plates & 2pcs SATA 7+15pin Male to Female cables if you do not have/use X880-A1-A2 board.

For the cooling solution, we use an active cooling solution of 2pin 4010 cooling fan with metal bracket to attach on Raspberry Pi 4 board for heat dissaption. You can also use P165-A or P165-B embedded aluminum alloy heatsink(with/without fan) for passive cooling solution. But please consider the affect of WiFi or Bluetooth.

You can use the X880-C1 to install:

  • Raspberry Pi 4 Model B, X880 V1.1 12V Dual SATA Gen3 HDD shield, X880-A1-A2 board(include 2pcs SATA 7+15pin Male to Female cables) & SSD/HDD
  • Raspberry Pi 4 Model B, X880 V1.1 12V Dual SATA Gen3 HDD shield, X880-A3 acrylic plates,2pcs SATA 7+15pin Male to Female cables & SSD/HDD

Features

  • Round cooling holes on both side of the case, provides good heat dissipation;
  • Reserved side slot(interface) for GPIO/FFC Cable
  • High quality metal material with surface galvanized process;
  • Case Size:185 x 120 x 120mm
  • Compatible with P165-A/P165-B heatsink for heat dissipation;
  • Compatible with Low-profile CPU Cooler ICE Tower Cooler;

Packing List

X880-C1 Case for X880+X880-A1-A2 (Choose this if you have X880+X880-A1-A2.)

  • 1 x X880-C1 Metal Case
  • 1 x 2Pin 4010 cooling fan with metal bracket
  • 4 x M2.5*6mm Spacers(Fix fan bracket)
  • 4 x M2.5*18mm Screw
  • 4 x KM3*5mm Screws(Fix the x880 kit to the bottom of the case)

X880-C1 Case for X880+X880-A3 (Choose this if you only have X880 board.)

  • 1 x X880-C1 metal case
  • 1 x 2Pin 4010 cooling fan with metal bracket
  • 2 x X883-A3 acrylic plate
  • 2 x SATA 7+15pin male to female cables
  • 4 x M2.5*6mm spacers(Fix fan bracket)
  • 4 x M2.5*18mm Screw
  • 4 x KM3*5mm screws(Fix the x880 kit to the bottom of the case)

User Manual

For Raspberry Pi4+X880+X880-A3+X880-C1:

https://youtu.be/LR-8xSe6670


For Raspberry Pi4+X880+X880-A1-A2+X880-C1:

https://youtu.be/RvBILJGetJ4

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.