2,841
edits
Changes
Jump to navigation
Jump to search
==Features==
{| class="wikitable"
|-
| FOR USE WITH ||
Raspberry Pi 4 Model B
|-
| Operating System ||
All Raspberry Pi operating systems
|-
| KEY FEATURES ||
* Ideal storage solution for Raspberry Pi 4 - M.2 NGFF SATA SSD Shield
* Supports up to 2TB M.2 NGFF SSD solid-state drive
* Only supports M.2 NGFF SSD 2280 length
* Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
* Integrated high efficiency step-Down Converter, 3.3V max 4A to power the SSD
* USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4
* Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying <ref>A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition</ref>
* LED blue indicator indicates drive status
* External self-powered or USB bus-powered
* Specially-made USB3.1 jumper to connect with Raspberry Pi - no cabling required!
* Fully compatible with [[X735]] for intelligent power management and cooling your Raspberry Pi
* Fully compatible with [[X710]] for wide input voltage (6~36V) and intelligent power management
* Fully compatible with [[X765]] for powering over Ethernet (POE, 5V 5A)
* Fully compatible with [[X728]] for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)
|-
| SPECIFICATION ||
* Power supply:
# 5Vdc +/-5% , Powered via USB port by Raspberry Pi
* Ports & Connectors:
# USB socket - USB 3.0 type A x1
# 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x1
* PCB Size 87mm x 56mm
|-
| NOTES ||
<references />
* NGFF SATA SSD is not included,Only compatible with Key-B SSD length 2280
* Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs
* As with all SSDs, new media must be formatted before use
* SSDs use exceptionally high performance storage media that will run hot when under load
* Older SSD drives with less efficient flash media may not perform as well as newer drives
|}
==Packing List==