X832-C1

From Geekworm Wiki
Jump to navigation Jump to search

X832-C1 Front
X832-C1 Back
X832-C1 Interface
X832-C1 for X832 V1.2+Pi4
X832-C1 for X832 V1.2+X735 V2.5+Pi4
X832-C1 Dimensions
X832-C1 Packing List

Overview

This is a new design X832-C1 metal case with latching power control switch and 2pin 4010 cooling fan specially deigned for X832 V1.2 version, does not support X832 V1.0 version or X835. X832-C1 metal case is released in January 2022.

You can use the X832-C1 to install

  • Raspberry Pi 4 Model B, X832 V1.2 3.5" SATA board and 3.5" SATA HDD
  • Raspberry Pi 4 Model B, X832 V1.2 3.5" SATA board, 3.5" SATA HDD and X735 Power Management Board

Note:

  1. The power control switch in X832-C1 metal case is latching switch.
  2. The Raspberry Pi 4 Model B, X832 V1.2 3.5" SATA board, 3.5" SATA HDD, X735 power management board and DC 12V Power Adapter are all not included in the packing list.
  3. When use with X735 board, the power supply MUST only be connected to X832 DC 12V IN port NOT X735.
  4. When use X832 V1.2 with X735 board, please REMOVE the jumper caps on the X832 V1.2.

Features

  • Support Max. 26.1mm thickness 3.5" SATA HDD installation, support 17.8mm & 26.1mm 3.5" SATA HDD
  • Compatible with X832 V1.2 version only, does not support X832 V1.0 version or X835
  • Power switch with beautiful LED indicator to control the power of X832 V1.2 and the Raspberry Pi 4 Model B
  • Reserved Side Slot(Interface) for GPIO/FFC Cable
  • Reserved Slot for X735 DC power Port, Microusb Port and Type-C Power Port(Don't plug any power adapter to X735)
  • When use with X735 board, the power supply MUST only be connected to X832 DC 12V IN port NOT X735.
  • When use X832 V1.2 with X735 board, please REMOVE the jumper caps on the X832 V1.2.
  • VESA mount: 100mm
  • Case Size(Installation): 168*104*75(mm) / 6.61 x 4.09 x 2.95 (inch);
  • High quality metal material with surface galvanized process;
  • Equipped with 2pin 4010 cooling fan in the case; But if use with X735 board, there is no need to use the cooling fan inside X832-C1 case.

Packing List

  • 1x X832-C1 metal case for X832 V1.2
  • 1x latching power control switch
  • 1x 2pin 4010 cooling fan
  • 1x Installation screws pack

User Manual

Note when use with X735 V3.0:

  • 1. When use X832 with Raspberry Pi 4 only, use the latching switch to connect on X832 PWR SW port.
  • 2. When use X832&X735 V3.0 with Raspberry Pi 4, use the momentary switch to connect on momentary switch port of X735 V3.0.

X832 V1.2+X735 V3.0

Installation Video for X832 V1.2 12V 3.5" SATA Shield+X735 V2.5+ X832-C1 Metal Case: https://youtu.be/yVxmb6SugJY

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.