X825-C2 Case

From Geekworm Wiki
Revision as of 12:13, 15 April 2021 by Cindy (talk | contribs) (→‎Installation Video)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

X825-C6 Case
X825-C6 Case
X825-C6 Case
X825-C3 CASE for X825 V1.1
X825-C3 CASE for X825 V1.1
X825-C3 CASE for X825 V1.1
X825-C1 Case for X825 v1.1-Front Side
X825-C1 Case for X825 v1.1-Left Side
X825-C1 Case for X825 v1.1-Back Side
X825-C1 case size
X825-C1 Case for X825 v1.1


Overview

This is a metal case with power control switch and super mute cooling fan, it is a perfect choice for X825 V1.2/V1.5 SSD/HDD storage board user. It also support to install the X735 Auto Cooling & safe shutdown board over Raspberry Pi.

Note: Because we found that USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So if you find the 2.4G signal is unstable, please try to use WIFI 5G AP. (Please refer to: raspberrypiwiki.com/X825#Document) We think this is caused by the unreliability of the Raspberry Pi's wifi design. If the Raspberry Pi Foundation reserves the SMA IPEX antenna interface, everything will become easier. We will also struggle to solve this issue in the future.

[update on December, 2019]

  • The X825 case has been updated to X825-C6 now.

[update on Oct. 8th, 2019]

We improve X825-C2, and named it X825-C3;We made the following improvements ON X825-C3 Case:

1. We canceled the front panel TF card slot and let the TF card hide inside the X825 case; we think that it may cause accidents if the TF card is exposed to the outside, also the users do not need to insert the TF card frequently.

2. We also added vents on the front panel with two reasons: one is for the coordination of the appearance, and the other is to dissipate heat;

3. We replaced the original 3010 cooling fan with new 4010 fan.

Features

  • Power switch with beautiful LED indicator to control the power of X825 V1.2/V1.5 and the Raspberry pi 4 Model B;
  • Support super mute cooling fan, hundreds of round cooling holes on both side of the case, provides good heat dissipation, bluetooth and WIFI signal;
  • Reserved Side Slot(Interface) for GPIO/FFC Cable
  • Reserved Slot for X735 DC power Port, microusb port and Type-C Power Port
  • Case Size(Installation): 11.3cm x 9.4cm x 6.7cm / 4.44inch x 3.7inch x 2.67inch;
  • High quality metal material with surface galvanized process;
  • Support super mute cooling fan;

4010 Fan

  • Bearing: Sleeve
  • Voltage: 5V DC
  • Working Current: 0.06A
  • Noise Level: 23.1dBA-26.1dBA
  • Speed: 4200 RPM
  • Dimensions:40x40x10mm
  • Cable length: 11cm/4.33inch
  • Net Weight:13g
  • Temperature range: -10+80°C

Packing List

  • 1 x X825 V1.2 Metal Case (with 4 pieces of M3 screws)
  • 1 x Power Control Switch
  • 1 x Mini Fan(with 4 pieces of screws)

User Manual

File:X825 Metal Case USER MANUAL EN-V1.pdf

Installation Guide

Installation Video

How to install X825 V1.5 + Raspberry Pi 4

IMG-6652-install-01.jpg

How to install X825 V1.5 + X735 V2.1 + Raspberry Pi 4

How-to-install-X825-X735-Raspberry-Pi-4.jpg

FAQ

1. Why remove the TF card slot in front of X825-C6 case?

  • A:Because we consider that the users do not need to insert the TF card frequently, exposure the TF card to outside may cause some unexpected trouble. So we do not open the TF card slot for X825 case.


2. Why update the previous honeycomb case?

  • A: It will be more beautiful and dust-proof without opening so many round holes compared with previous version.