Changes

This guide is only for X735 V2.5 shield based on RASPBIAN. (Not tested on Ubuntu, openmediavault, retropie or other third party OS like Manjaro,RoninDojo.)

'''install''' sudo apt-get install -y python-smbus python sudo apt-get install -y pigpio python-pigpio python3-pigpio git git clone https://github.com/geekworm-com/x735-v2.5 cd x735-v2.5 sudo chmod +x *.sh sudo bash install-dietpi.sh echo "alias x735off='sudo /usr/local/bin/x735softsd'" >> ~/.bashrc sudo reboot == For myNode OS and Umbrel ==About myNode, please refer to http://www.mynodebtc.com/ About Umbrel, please refetrto https://getumbrel.com/

#create '''Install''' login to mynode teminal via Putty or Xsheel tool, the default user name is `admin`, password is `bolt`, then run the following command: Login to mynode teminal via Putty or Xsheel tool, the default user name is `umbrel`, default password is `moneyprintergobrrr`, then run the following command: '''FAQ''' Q: What are the credentials to SSH into my Umbrel? A: ssh umbrel@umbrel.local (or ssh umbrel@<IP address of your Umbrel>). The password is the same as your Umbrel's password. If you haven't set a alias x735offpassword yet, the default password is: moneyprintergobrrr. <pre>  sudo apt-get update sudo apt-get install -y python-smbus python pigpio python-pigpio python3-pigpio git wiringpi sudo apt-get install -y python-rpi.gpio rpi.gpio git clone https://github.com/geekworm-com/x735-v2.5 cd x735-v2.5 chmod +x *.sh sudo bash install-mynode.sh echo "alias x735off='sudo /usr/local/bin/x735softsd.sh'" >> ~/.bashrc