5,105
edits
Changes
Jump to navigation
Jump to search
no edit summary
{{GD Template Impl}}
<big>Although this installation tutorial is still available, but we strongly recommend that you use [[X729-script]] new tutorial, and we no longer maintain this page.</big>
==Setup script==
The following test is base on * [https://downloads.raspberrypi.org/raspios_arm64/images/raspios_arm64-2023-05-03/2023-05-03-raspios-bullseye-arm64.img.xz 2023-05-03-raspios-bullseye-arm64.img.xz]
* [https://www.raspberrypi.com/software/operating-systems/ 2022-09-22-raspios-bullseye-armhf.img.xz]
* [https://www.raspberrypi.com/software/operating-systems/ 2022-09-22-raspios-buster-armhf.img.xz]
sudo apt-get update
sudo apt-get -y upgrade
sudo apt-get -y install i2c-tools python3-smbus python-smbus sudo apt-get -y install pigpio python-pigpio python3-pigpiorpi.gpio
sudo apt-get -y install python3-pip python3-pil
#sudo apt-get -y install pigpio python-pigpio python3-pigpio
2.1 Once you have logged into your Raspberry Pi from the command line, run the command to see all the connected devices
70: -- -- -- -- -- -- -- --
</PRE>
Explaination:
<PRE>
#36 - the address of the battery fuel gauging chip
#3c - address of oled display，This value only exists when the oled is inserted，check if the OLED displayis inserted in the correct direction if you don't found the above i2c port
#40 - TI INA219 12-bit current/voltage/power monitor
#68 - the address of the RTC chip
3.2. Install script&reboot:
cd x729
chmod +x *.sh
sudo bash pwr.sh
#Reboot the Raspberry Pi or long press on-board button switch to turn off
sudo rebootnow
3.3 Powering off the Raspberry Pi from software
x729off
6.3 Run the command and comment out these five lines:
sudo nano /lib/udev/hwclock-set
[[File:X729-7.png|none]]
Return to [[X729]] or [[X729-hardware]]
<!--Add review function! -->