Difference between revisions of "X729"
Jump to navigation
Jump to search
(Created page with "{{GD Template Impl}} ==Overview== ==Features== ==Packing List== ==User Manual== <!--Add review function! --> <comments /> <!--Please choose the --> <!--Remove other cate...") |
|||
Line 3: | Line 3: | ||
==Features== | ==Features== | ||
+ | Smart and powerful Uninterruptible Power Supply (UPS) | ||
+ | |||
+ | '''UPS Output''' | ||
+ | * Provides continuous operations for up to 10~30hours (depending on battery type and qty used) | ||
+ | * Max 5.1V 6000mA Power Backup for even the most demanding RPi set ups | ||
+ | * Integrated TI INA219 12-bit current/voltage/power monitor | ||
+ | * Measure both output voltage and current draw over I2C with high precision | ||
+ | * Integrate Advanced Power MOSFET with Equivalent of 7mΩ RDS(ON) to reduce power loss | ||
+ | |||
+ | '''Battery Charging''' | ||
+ | * Supports 3000mA fast battery charging | ||
+ | * Battery over current protection and over voltage protection | ||
+ | * Protection of battery cell Reverse Connection | ||
+ | * Integrated Maxim's fuelgauge systems (Reading battery voltage and percentage over i2c) | ||
+ | * Onboard 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100% | ||
+ | * 18650 two cells lithium Ion holder | ||
+ | |||
+ | '''Power Input''' | ||
+ | * Integrated highefficiency stepdown DCDC converter | ||
+ | * Wide 6V to 24V operating input range | ||
+ | * Up to 95% Efficiency | ||
+ | * Up to 10A output current to keep 3A fast charging and powering Raspberry Pi at the same time | ||
+ | * Allows powering from a car, a solder pannel and other power sources | ||
+ | * Most common power input jack: 5.5x2.1mm | ||
+ | |||
+ | '''Power Management''' | ||
+ | * Onboard push button to control power on, safe shutdown, reboot and force shutdown | ||
+ | * Supports full poweroff from software | ||
+ | * Onboard blue LED shows the status of power on, reboot and shutdown | ||
+ | * AC power loss or power adapter failure detection (LED, GPIO and buzzer alarm) | ||
+ | * Jumper setting to enable Auto power on when power applied or restored | ||
+ | * Automatic safe shutdown when battery low (voltage programmable) | ||
+ | * Onboard buzzer alarm for power loss and low battery | ||
+ | * Ultralow standby power consumption to maximize battery life | ||
+ | * Advanced system powerpath management avoids batteries frequent charging and discharging | ||
+ | |||
+ | '''RTC''' | ||
+ | * Integrated Hardware Real Time Clock (RTC) with Battery BackUp | ||
+ | * Keeps track of the time while the Raspberry Pi is switched off | ||
+ | * Uses the most common DS1307 RTC real time clock | ||
+ | * Uses the 18650 battery to maintain the date and time no additional battery required | ||
+ | |||
+ | '''FAN''' | ||
+ | * Dedicated PWM cooling fan for Raspberry Pi | ||
+ | * Air flow up to 6.01CFM and maximum speed of 5000 RPM | ||
+ | * Smooth PWM adjustment provides a quiet experience | ||
+ | * RealTime fan speed reading | ||
+ | * Programmable temperature and fan speed | ||
+ | |||
+ | '''Misc''' | ||
+ | * Powers the Raspberry Pi via the 40pin header no additional cabling required | ||
+ | * Reserved 40pin stackable Header for AddOn Boards | ||
+ | * 1x4 Pin header and Screw holes for OLED display | ||
+ | * Works with all current models of the Raspberry Pi using a 40 pin header | ||
+ | * XH2.54 connectors for extra battery x1, 5V output x2 | ||
+ | * PH2.04P for external power switch | ||
+ | |||
+ | ==Specification== | ||
+ | * Power input: 624Vdc ±5%, ≥3A | ||
+ | * UPS output : 5.1V ±5% Max 6A | ||
+ | * UPS charging current: 2.3~3.2A | ||
+ | * Terminal Battery Voltage : 4.24V | ||
+ | * Battery Recharge Threshold : 4.1V | ||
==Packing List== | ==Packing List== |
Revision as of 15:07, 19 November 2022
Overview
Features
Smart and powerful Uninterruptible Power Supply (UPS)
UPS Output
- Provides continuous operations for up to 10~30hours (depending on battery type and qty used)
- Max 5.1V 6000mA Power Backup for even the most demanding RPi set ups
- Integrated TI INA219 12-bit current/voltage/power monitor
- Measure both output voltage and current draw over I2C with high precision
- Integrate Advanced Power MOSFET with Equivalent of 7mΩ RDS(ON) to reduce power loss
Battery Charging
- Supports 3000mA fast battery charging
- Battery over current protection and over voltage protection
- Protection of battery cell Reverse Connection
- Integrated Maxim's fuelgauge systems (Reading battery voltage and percentage over i2c)
- Onboard 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
- 18650 two cells lithium Ion holder
Power Input
- Integrated highefficiency stepdown DCDC converter
- Wide 6V to 24V operating input range
- Up to 95% Efficiency
- Up to 10A output current to keep 3A fast charging and powering Raspberry Pi at the same time
- Allows powering from a car, a solder pannel and other power sources
- Most common power input jack: 5.5x2.1mm
Power Management
- Onboard push button to control power on, safe shutdown, reboot and force shutdown
- Supports full poweroff from software
- Onboard blue LED shows the status of power on, reboot and shutdown
- AC power loss or power adapter failure detection (LED, GPIO and buzzer alarm)
- Jumper setting to enable Auto power on when power applied or restored
- Automatic safe shutdown when battery low (voltage programmable)
- Onboard buzzer alarm for power loss and low battery
- Ultralow standby power consumption to maximize battery life
- Advanced system powerpath management avoids batteries frequent charging and discharging
RTC
- Integrated Hardware Real Time Clock (RTC) with Battery BackUp
- Keeps track of the time while the Raspberry Pi is switched off
- Uses the most common DS1307 RTC real time clock
- Uses the 18650 battery to maintain the date and time no additional battery required
FAN
- Dedicated PWM cooling fan for Raspberry Pi
- Air flow up to 6.01CFM and maximum speed of 5000 RPM
- Smooth PWM adjustment provides a quiet experience
- RealTime fan speed reading
- Programmable temperature and fan speed
Misc
- Powers the Raspberry Pi via the 40pin header no additional cabling required
- Reserved 40pin stackable Header for AddOn Boards
- 1x4 Pin header and Screw holes for OLED display
- Works with all current models of the Raspberry Pi using a 40 pin header
- XH2.54 connectors for extra battery x1, 5V output x2
- PH2.04P for external power switch
Specification
- Power input: 624Vdc ±5%, ≥3A
- UPS output : 5.1V ±5% Max 6A
- UPS charging current: 2.3~3.2A
- Terminal Battery Voltage : 4.24V
- Battery Recharge Threshold : 4.1V
Enable comment auto-refresher
Anonymous user #9
Permalink |
Anonymous user #10
Anonymous user #9
Permalink |
Anonymous user #11
Lisa
Anonymous user #8
Permalink |
Walker
Harry
Anonymous user #8
Permalink |
Walker
Anonymous user #7
Permalink |
Walker
Anonymous user #6
Permalink |
Walker
Anonymous user #5
Permalink |
Walker
Anonymous user #4
Permalink |
Lisa
Anonymous user #3
Permalink |
Lisa
Anonymous user #2
Permalink |
Lisa
Lisa
Anonymous user #1
Permalink |
Lisa