Changes

The [[X715]] is the updated version from [[X710]]. The X715 is sold out (or you can find some remaining stock from the Amazon site) and will no longer be produced, so if you still need it, consider replacing it with the [[X735]], which has the same features as the X715.

The X715 is a power management expansion board for all current models of the Raspberry Pi using a 40-pin header. It provides Max 5A of continuous output current over a wide 6V to 60V operating input range with excellent load and line regulation，intelligent and safe power management,regulation and a low noise PWM cooling fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The X710 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.

* - Ideal Ultra-wide input range power management solution supply for Raspberry Pi* - Integrated high-efficiency step-down DC-DC converter* - Wide 6V to 60V operating input range* - 5A continuous output current* - High efficiency up to 90%* - On-board Convenient power input via DC jack and /screw terminal/XH2.54 connector for power input* - Convenient Power output via screw terminal, XH2.54 connector and the 40-pin header * - Intelligent and safe power management* - Equipped with momentary button switch for easy power control* - Press the button to turn on* - Press the button and hold for 1~2seconds to reboot* - Press the button and hold for >8seconds to force shutdown* - Integrated high-performance MOSFET power switch allows continuous drain current up to 17A* - On-board blue LED shows the status of power on, reboot and shutdown/off* - With 4-Pin PWR port to use external latching power switch, only supports latching switch, DON'T support Momentary switch* - Powers the Raspberry Pi via the 40-pin header - no additional cabling required * - Use the silent PWM cooling fan, and support fan speed is control by script, support read fan speed, and we provide sample python code* Reserved camera slot and display cutout - Both can still be used with X710 attached* - Reserved 40-pin stackable Header for Add-On Boards* - Works with all current models of the Raspberry Pi using a 40 pin header* - Fully compatible with [[X820]],[[X850]], [[X860]], [[X870]], [[X822]], [[X852]], [[X825]], [[X828]], [[X855]], [[X856]], [[X857]], [[X862]],[[X873]] but there is no match metal case for them

==DocumentUser Manual==* Script installation Tutorial: [[X715 Software-script]] ==PCB dimention==X715 Dimensions source file (DXF): [[File:X715-PCB-v1.0.dxf]] - You can view it with Autodesk Viewer online