2,869
edits
Changes
X710
,==Overview==
The X710 is a power management expansion board for all current models of the Raspberry Pi using a 40-pin header. It provides 5A of continuous output current over a wide 6V to 36V operating input range with excellent load and line regulation，intelligent and safe power management, safe shutdown and full poweroff through software, and a low noise cooling fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The X710 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.
Note: [[X710]] does not support Raspberry Pi 5.
==Features==
*X710 Power mgt Board x 1
*Screw M2.5 *5mm x 8
*Spacer FM/F M2.5 *12mm x 4
*Spacer F/F M2.5 *12mm x 4
*Jumper x 2
==Document==
* X710 Dimensions source file (DXF): [[File:X710-PCB-v1.dxf|X70 Dimensions source file (DXF)]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online
For the script, please refer to [http://www.suptronics.com/miniPCkits/x710-software.html Software Guide]
[[File:接口示意图.jpg|800px|X710]]
[[File:功能说明-1500x1500.jpg|800px|X710]]
Please refer to here about the PH2.0 connector details: [[File:PH2.0 connector specifications.pdf|thumb|PH2.0 connector specifications]]
==Installation Guide==
[[Category:Product Manual]]
[[Category:Raspberry pi]]