<big>X635 Software Guide base on Raspberry Pi OS bullseye</big>
To use the HDMI to CSI-2 bridge, you will need to enable '''[[How to enable camera support in Raspberry Pi OS|Enable legacy camera support]]'''.
Open a terminal window and type the following command:
sudo raspi-config
Then use the cursor keys to scroll down to "Interface Options".
[[File:X635-software-03.png|700px]]
Press the ‘Enter’ key
[[File:X635-software-05.png|700px]]
Make sure ‘Legacy Camera Enable/disable legacy camera support’ is selected and press the ‘Enter’ key. " Use the cursor keys to select and press the ‘Enter’ key
[[File:X635-software-09.png|700px]]
Press ‘Enter’ again to confirm
[[File:X635-software-12.png|700px]]
Then select 'Finish' to exit.
[[File:X635-software-20.png|700px]]
Run the following command to reboot device
sudo reboot
[[File:X635-software-15.png|700px]]