1,958
edits
Changes
X635
,no edit summary
{{GD Template Impl}}
==Foreword==
# Don't power the X635 via USB Type-C socket when it is connected to another PC via the USB Type-A connector.
# To enable the CM4 to be updated via rpiboot, You have to put a jumper over the pins of "nBOOT" and "GND" on the 6-pin header.
# Please use only the screws(M2x3mm) for mounting the SSD come with this kit. Other screw size(length>3mm) will damage your Micro-SD card or the card socket!!!
==Overview==
The X635 is a ultra-compact carrier board specifically designed for the Raspberry Pi compute module 4.