Difference between revisions of "X630-Hardware-Reset"

From Geekworm Wiki
Jump to navigation Jump to search
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
First, we recommend that you read [https://www.raspberrypi.org/app/uploads/2013/07/RaspiCam-Documentation.pdf Raspberry Pi camera applications document]
 +
 
'''For Hardware Reset''' - Starting RASPISTILL or RASPIVID once then reboot your Raspberry Pi.
 
'''For Hardware Reset''' - Starting RASPISTILL or RASPIVID once then reboot your Raspberry Pi.
 +
==Use GStreamer Tools ==
 +
You need an accessory board ([[X630#X630-A2]]) for audio capturing.
 +
 +
Please refer to [[CSI-2-Software]] if you are use the '''Raspberry Pi Bullseye OS'''
 +
 
==Use RASPISTILL RASPIVID ==
 
==Use RASPISTILL RASPIVID ==
−
Only for user want to use old RASPISTILL RASPIVID command.
+
Only for OS before Rasberry Pi Bullseye OS such as '''Raspberry Pi Buster OS'''
  
 
1. Update & upgrade the raspberry pi system (It will take a long time depend on the different country)
 
1. Update & upgrade the raspberry pi system (It will take a long time depend on the different country)
Line 11: Line 18:
 
Navigate to ''''Interfacing Options'''' and hit Enter. Now select the ''''Camera'''' option, and hit the Enter key to enable it. Select “Finish” and select to '''reboot''' your Raspberry Pi.
 
Navigate to ''''Interfacing Options'''' and hit Enter. Now select the ''''Camera'''' option, and hit the Enter key to enable it. Select “Finish” and select to '''reboot''' your Raspberry Pi.
  
−
3. Edit /boot/config.txt to add the line (that will need sudo, and use your preferred editor)
+
3. Edit /boot/config.txt to add the line (that will need sudo, and use 'sudo nano /boot/config.txt')
 
  dtoverlay=tc358743
 
  dtoverlay=tc358743
 
to the end of the file.
 
to the end of the file.
Line 26: Line 33:
 
Here, "image" is the name of your image that will be saved to your Raspberry Pi
 
Here, "image" is the name of your image that will be saved to your Raspberry Pi
  
−
14. If you need to take second image, then you will need to reboot the Raspberry Pi and execute the "raspistill" again
+
5. If you need to take second image, then you will need to reboot the Raspberry Pi and execute the "raspistill" again
 
  sudo reboot
 
  sudo reboot
  
−
15. To record a video with the X630 module
+
5. To record a video with the X630 module
 
  raspivid -o video.h264 -t 10000
 
  raspivid -o video.h264 -t 10000
  
 
Here, "video" is the name of your video and "10000" is the number of milliseconds.
 
Here, "video" is the name of your video and "10000" is the number of milliseconds.
  
−
16. If you need to record second video, then you will need to reboot the Raspberry Pi and execute the "raspivid" again
+
7. If you need to record second video, then you will need to reboot the Raspberry Pi and execute the "raspivid" again
−
sudo reboot
 
−
 
 
−
<hr>
 
−
'''For Hardware Reset''' - Starting RASPISTILL or RASPIVID once then reboot your Raspberry Pi
 
−
 
 
−
Please use the following guide if your dip switch is changed to 'Hardware reset' position.
 
−
 
 
−
17. To take a photo with the X630 Module
 
−
raspistill -o image.jpg
 
−
Here, "image.jpg" is the name of your image that will be saved to your Raspberry Pi
 
−
 
 
−
18. If you need to take second image, then you will need to reboot the Raspberry Pi and execute the "raspistill" again.
 
 
  sudo reboot
 
  sudo reboot
  
−
19. To record a video with the X630 module
+
==Audio&Video capturing using GStreamer==
−
raspivid -o video.h264 -t 10000
+
Refer to [[CSI Audio Video capturing using GStreamer]]
−
Here, "video" is the name of your video and "10000" is the number of milliseconds.
 
  
−
20. If you need to record second video, then you will need to reboot the Raspberry Pi and execute the "raspivid" again.
 
−
sudo reboot
 
  
 
<comments />
 
<comments />

Latest revision as of 16:28, 27 June 2023

First, we recommend that you read Raspberry Pi camera applications document

For Hardware Reset - Starting RASPISTILL or RASPIVID once then reboot your Raspberry Pi.

Use GStreamer Tools

You need an accessory board (X630#X630-A2) for audio capturing.

Please refer to CSI-2-Software if you are use the Raspberry Pi Bullseye OS

Use RASPISTILL RASPIVID

Only for OS before Rasberry Pi Bullseye OS such as Raspberry Pi Buster OS

1. Update & upgrade the raspberry pi system (It will take a long time depend on the different country) 

sudo apt-get update
sudo apt-get upgrade

2. Enable camera module (the camera is enabled by default in Raspberry pi Bullseys OS) 

sudo raspi-config

Navigate to 'Interfacing Options' and hit Enter. Now select the 'Camera' option, and hit the Enter key to enable it. Select “Finish” and select to reboot your Raspberry Pi.

3. Edit /boot/config.txt to add the line (that will need sudo, and use 'sudo nano /boot/config.txt') 

dtoverlay=tc358743

to the end of the file.

4. Reboot. If all is well you should get a /dev/video0 device. 

pi@raspberrypi:~ $ ls /dev/video0
/dev/video0

4. To take a photo with the X630 Module 

raspistill -o image.jpg

Here, "image" is the name of your image that will be saved to your Raspberry Pi

5. If you need to take second image, then you will need to reboot the Raspberry Pi and execute the "raspistill" again 

sudo reboot

5. To record a video with the X630 module 

raspivid -o video.h264 -t 10000

Here, "video" is the name of your video and "10000" is the number of milliseconds.

7. If you need to record second video, then you will need to reboot the Raspberry Pi and execute the "raspivid" again 

sudo reboot

Audio&Video capturing using GStreamer

Refer to CSI Audio Video capturing using GStreamer


Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Retrieved from "https://wiki.geekworm.com/index.php?title=X630-Hardware-Reset&oldid=16462"