Difference between revisions of "X630-A4"
Jump to navigation
Jump to search
Line 9: | Line 9: | ||
==Features== | ==Features== | ||
− | Designed especially for PiKVM ( Raspberry Pi-based KVM over IP) | + | *Designed especially for PiKVM ( Raspberry Pi-based KVM over IP) |
− | Pefectly Works with the latest Raspberry Pi Zero 2W (Without Soldering Header) | + | *Pefectly Works with the latest Raspberry Pi Zero 2W (Without Soldering Header) |
− | Fully compatiblie with PiKVM OS | + | *Fully compatiblie with PiKVM OS |
− | Control a server and computer using a web browser | + | *Control a server and computer using a web browser |
− | HDMI Full HD capture based on the TC358743 chip | + | *HDMI Full HD capture based on the TC358743 chip |
− | OTG Keyboard & mouse; Mass Storage Drive emulation | + | *OTG Keyboard & mouse; Mass Storage Drive emulation |
− | Hardware Real Time Clock (RTC) with CR1220 coin battery socket | + | *Hardware Real Time Clock (RTC) with CR1220 coin battery socket |
− | Equipped with solid-state relays to protect RPi GPIO pins from computer and ESD spikes | + | *Equipped with solid-state relays to protect RPi GPIO pins from computer and ESD spikes |
− | ATX control via RJ45 connector - Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely | + | *ATX control via RJ45 connector - Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely |
− | Reserves the 4-pin header & spacers for I2C OLED display | + | *Reserves the 4-pin header & spacers for I2C OLED display |
− | Reserves the PH2.0-2P 5V power connector for fan and other devices | + | *Reserves the PH2.0-2P 5V power connector for fan and other devices |
− | Connects to the Raspberry Pi via Pogo Pins - no wirindg & soldering required | + | *Connects to the Raspberry Pi via Pogo Pins - no wirindg & soldering required |
− | Power using USB Type-C | + | *Power using USB Type-C |
− | USB On-the-go (OTG) using USB Type-C | + | *USB On-the-go (OTG) using USB Type-C |
==Packing List== | ==Packing List== |
Revision as of 18:40, 20 July 2022
Contents
Overview
PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services!
Features
- Designed especially for PiKVM ( Raspberry Pi-based KVM over IP)
- Pefectly Works with the latest Raspberry Pi Zero 2W (Without Soldering Header)
- Fully compatiblie with PiKVM OS
- Control a server and computer using a web browser
- HDMI Full HD capture based on the TC358743 chip
- OTG Keyboard & mouse; Mass Storage Drive emulation
- Hardware Real Time Clock (RTC) with CR1220 coin battery socket
- Equipped with solid-state relays to protect RPi GPIO pins from computer and ESD spikes
- ATX control via RJ45 connector - Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely
- Reserves the 4-pin header & spacers for I2C OLED display
- Reserves the PH2.0-2P 5V power connector for fan and other devices
- Connects to the Raspberry Pi via Pogo Pins - no wirindg & soldering required
- Power using USB Type-C
- USB On-the-go (OTG) using USB Type-C
Packing List
- 1 x X630-A4 HAT Shield for PiKVM
- 8 x M2.5 x 3 Screws
- 2 x M2.5 x 15 Specer
- 3 x M2.5 x 4+4 Specer
- 1 x M2.5 x 10+4 Specer
- 1 x M2.5 x 15+4 Specer
User Manual
- X630-A4 Dimensions source file (DXF): File:X630-A4-v1.dxf - You can view it with Autodesk Viewer online
Enable comment auto-refresher