5,123
edits
Changes
Jump to navigation
Jump to search
X630
,[[File:X630-IMG-2671.jpg|thumb|right|X630 HDMI TO csi-2]]
[[File:X630-IMG-2669.jpg|thumb|right|X630 HDMI TO csi-2]]
[[File:x630-acceX630.jpg|thumb|right|X630 Accessories]]
[[File:X630-a2-IMG-3258.jpg|thumb|right|X630-A2 Shield]]
[[File:X630-a2-IMG-3270.jpg|thumb|right|X630-A2 + X630 assembly]]
[[File:X630-pi0-IMG-3178-case.jpg|thumb|right|X630 + Pi zero + Case]]
==Overview==
'''[Update]''': X630 V1.5 is released on Dec. 2022;
V1.5 has the following updates based on V1.3
* Fixed HDMI back powering issue.
* Remove the software reset. (Since there is no usage scenario and the product is more complex, pikvm does not need software reset etc.)
[[File:X630-V1.5-VS-X630-V1.3.jpg|700px|none|X630 V1.5 vs X630 V1.3]]
The X630 hdmi to csi module is a bridge module that converts HDMI stream to MIPI CSI-2, which enables your Raspberry Pi to accept HDMI video and audio streams and process them as incoming data source.
| 20 || A_SD || I2S/TDM data signal (Data) || 3.3V
|}
==X630-C1==
X630-C1 is the matching case for X630 and X630-A2, But we no longer produce, if you need, you can refer to the 3D drawings below.
[[File:X630-c1-asm.zip]] or [[File:X630-c1-asm.stp]]
==User Manual==
* [[X630-Software]]
* Application: https://qengineering.eu/install-gstreamer-1.18-on-raspberry-pi-4.html
* Chip Information-EN: [[File:TC358743XBG_datasheet_en_20171026.pdf|none|HDMI TO CSI-2 Chip-EN]]
* Chip Information-CN: [[File:TC358743XBG_datasheet_zh_cn_20151218.pdf|none|HDMI TO CSI-2 Chip-CN]]
* X630 3D file: [[File:X630-asm.stp]]
==Packing List==
[[File:X630-PCB.png]]
==How to install X630, X630-A2 X630-C1==
[[File:X630安装图-2000x2000.jpg|800px|How to install X630]]
<HR/>
[[File:X630+X630-A1Installation.jpg|800px| How to install X630/X630-A2/X630-C1]]
==Installation Video==
==FAQ==
'''Notes & Known Issues'''
First, we recommend that you read [https://www.raspberrypi.org/app/uploads/2013/07/RaspiCam-Documentation.pdf Raspberry Pi camera applications document]
(1) If using GStreamer or PiKVM, please change to Hardware reset mode. Otherwise, the X630 won't be detected and there will be no video.
(4) If GStreamer is installed in Raspberry Pi OS, RASPISTILL & RASPIVID are no longer worked.
Q: How Do I Know if My Raspberry Pi Camera is Working? (X630 is actually a CAMERA device)
A: Refer to https://raspberrytips.com/troubleshooting-camera-module/