Difference between revisions of "X630"

From Geekworm Wiki
Jump to navigation Jump to search
Line 29: Line 29:
  
 
==User Manual==
 
==User Manual==
 +
* [[X630-Hardware]]
 
* [[X630-Software]]
 
* [[X630-Software]]
  

Revision as of 12:06, 23 September 2021

X630 HDMI TO csi-2
X630 HDMI TO csi-2
X630 HDMI TO csi-2
X630 Accessories and size

Overview

The X630 hdmi to csi module is a bridge module that converts HDMI stream to MIPI CSI-2, which enables your Raspberry Pi to accept HDMI video and audio streams and process them as incoming data source.

X630 HDMI to CSI-2 diagram

Features

  • Specifically designed mounting hole for the Raspberry Pi
  • HDMI to CSI-2 bridge chip: Toshiba TC358743XBG
  • Video Formats Support (Up to 1080P)
  • Audio is supported and can be transmitted over CSI-2 stream or over I2S
  • CSI-2 Transmit Interface MIPI CSI-2 compliant (Version 1.01 Revision 0.04 -2 April 2009)
  • CSI-2 connector: 15 pin FPC with 1.0 mm pitch
  • Able to start RASPISTILL or RASPIVID multiple times and no reboot required
  • Easily fixed on Raspberry Pi and DIY your pefect case

Packing List

  • 1x X630 HDMI to CSI-2 Module
  • 1x X630-A1 Board
  • 1 x FPC cable(5cm length)
  • 1 x FPC cable-for backup(15cm length)
  • 2 x F/F M2.5*17mm Spacer
  • 4 x M2.5*5 Screw
  • 1 x M2.5 Nut

User Manual

FAQ

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #5

one month ago
Score 0++
Does the X630-A2 audio board work with PiKVM V2 DIY (using X630 and X630-C1 case)? Is any additional configuration required like on PiKVM-A3 or should this just work with pikvm without additional configuration?

Anonymous user #4

one month ago
Score 0++
How long will this product be in production/be supported?

Anonymous user #3

3 months ago
Score 0++
Which combination of X630 X630-A3 version is able of I2S audio adding the extra I2S cable ?

Walker

3 months ago
Score 0++
X630-A3 board with I2S interface and with I2S cable

Anonymous user #2

10 months ago
Score 0++
Thanks for the reply Walker - I'll try those 779 instructions again, but no success in past efforts.

Anonymous user #2

10 months ago
Score 0++
Since the X630-X2 is a board to pass Audio in to the I2C connection, a guide on activating the I2C audio input on the Raspberry Pi would be most appreciated.

Walker

10 months ago
Score 0++

Hello, you can refer to this: https://wiki...779-Software

There is a guide about audio input on the Raspberry Pi

Anonymous user #1

23 months ago
Score 0++
A 3D printed case for this wonderful product?

Lisa

23 months ago
Score 0++

Hi,

Sorry,there are currently no 3D printed case for X630.