8,941
edits
Changes
[[File:X6000K-main.jpg|thumbnail|right|400px]]
[[File:X6000K-IMG-1554.jpg|thumbnail|right|400px]]
[[File:X6000-IMG-1543.jpg|thumbnail|right|400px]]
== Features of '''X6000K 7.1CH''' ==
{| class="wikitable" border="1"
|-
| For Use With
| Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
|-
| Operating System
| - OSMC - 2.0 stereo audio / 5.1 channel surround sound / 7.1 channel surround sound
- Openelec - 2.0 stereo audio / 5.1 channel surround sound / 7.1 channel surround sound
- Moode Audio Player - 2.0 stereo audio outputs
- Raspbian Jessie - 2.0 stereo audio outputs
- Rune audio - 2.0 stereo audio outputs
- Pi Core Player - To be tested
|-
| Key Features
| - Ultra-compact chassis
- Ideal for Home Theater Systems
- Ideal for 7.1 channel surround audio systems
- Used four ESS Tech Sabre premier stereo DACs ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Each DAC has independent ultra-low-jitter clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Supports up to 1TB 2.5-inch SATA hard drives
- High quality video performance
- Supports SPDIF Optical Digital Audio
- Supports HDMI high-bit-rate (HBR) audio
- 4 analog stereo 3.5mm jack outputs
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Allows you to split the audio stream from a HDMI signal
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Connects directly to the Raspberry Pi - no additional cables needed
- Powers the Raspberry Pi - no additional power supply
- Lighted power switch
- Raspberry Pi status LEDs still visible
- Access to Raspberry Pi GPIO
- Easy to change the Raspberry Pi OS SD card - No need to open the case
- Easy DIY with Raspberry Pi
|-
| Power Supply Unit (Optional Accessories)
| - AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
- With 2 snap-in plugs for North America (US) and Europe (EU)
|-
| Specification
| - Power supply: +5Vdc +/-5%
- Input Ports: 1 x HDMI
- Output Ports: 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack
- Analog audio output level: 2V RMS
- Optical S/PDIF Audio Sampling Rate: Up to 192 kHz
- HDMI Audio Format: LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby
Digital Plus Dolby TrueHD, and DTS-HD Master Audio
- Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
- Size 122mm x 90mm x 90mm
|-
| Notes
| - For use with original power supply unit only
- WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
- Approx 3 seconds delay to turn on Raspberry Pi after the power button is pressed
(The powerful HDMI audio processing chipset needs time to bootup)
|-
| Packing List
| - X6000 Metal Case x 1
- X6000-7.1CH Expansion Board Kit x 1
- X800K HDD Expansion Board Kit x 1
- Accessories kit x 1
- Tool kit x 1
|}
== Features of '''X6000K 8.0CH''' ==
{| class="wikitable" border="1"
|-
| For Use With
| Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
|-
| Operating System
| - OSMC - 8-channel L/R audio outputs
- Moode Audio Player - 8-channel L/R audio outputs
- Raspbian Jessie - 8-channel L/R audio outputs
- Openelec - To be tested
- Volumio - To be tested
- Rune audio - To be tested
- Pi Core Player - To be tested
|-
| Key Features
| - Ultra-compact chassis
- Ideal for car audio entertainment
Ideal for stage audio systems
- Ideal for multi-channel audio systems
- 8-channel stereo audio outputs at the same time even if playing 2-channel audio
- Used four ESS Tech Sabre premier stereo DACs ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Each DAC has independent ultra-low-jitter clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Supports up to 1TB 2.5-inch SATA hard drives
- High quality video performance
- Supports SPDIF Optical Digital Audio
- Supports HDMI high-bit-rate (HBR) audio
- 4 analog stereo 3.5mm jack outputs
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Allows you to split the audio stream from a HDMI signal
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Connects directly to the Raspberry Pi - no additional cables needed
- Powers the Raspberry Pi - no additional power supply
- Lighted power switch
- Raspberry Pi status LEDs still visible
- Access to Raspberry Pi GPIO
- Easy to change the Raspberry Pi OS SD card - No need to open the case
- Easy DIY with Raspberry Pi
|-
| Power Supply Unit (Optional Accessories)
| - AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
- With 2 snap-in plugs for North America (US) and Europe (EU)
|-
| Specification
| - Power supply: +5Vdc +/-5%
- Input Ports: 1 x HDMI
- Output Ports: 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack
- Analog audio output level: 2V RMS
- Optical S/PDIF Audio Sampling Rate: Up to 192 kHz
- HDMI Audio Format: LPCM 8.0CH
- Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
- Size 122mm x 90mm x 90mm
|-
| Notes
| - For use with original power supply unit only
- WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
- Approx 3 seconds delay to turn on Raspberry Pi after the power button is pressed
(The powerful HDMI audio processing chipset needs time to bootup)
|-
| Packing List
| - X6000 Metal Case x 1
- X6000-8.0CH Expansion Board Kit x 1
- X800K HDD Expansion Board Kit x 1
- Accessories kit x 1
- Tool kit x 1
|}
== Hardware installation ==
For X6000K-7.1CH DIY Kits, please refer to here: [http://www.suptronics.com/miniPCkits/x6000k-7.1ch-hardware.html Hardware installation]
For X6000K-8.0CH DIY Kits , please refer to here: [http://www.suptronics.com/miniPCkits/x6000k-8.0ch-hardware.html Hardware Installation]
== Software Configuration ==
For X6000K-7.1CH DIY Kits, please refer to here: [http://www.suptronics.com/miniPCkits/x6000-7.1ch-software.html Software Configuration]
For X6000K-8.0CH DIY Kits , please refer to here: [http://www.suptronics.com/miniPCkits/x6000-8.0CH-software.html Software Configuration]
More details please refer to [http://www.suptronics.com/miniPCkits/x6000K-7.1ch.html more detail]
== FAQ ==
Q1. What do you need to use Raspberry Pi X6000-7.1CH Expansion Board?
(1) A Raspberry Pi board
(2) A DC 5V 4A Power Supply, please refer to 5V 4A Power Supply
(3) A case for X6000(optional)
Q2. Why there is just output 1 on the board have sound?
(1) This board is 7.1 channel surround sound output, so the sound output is depended by your audio file. Because output 1 is for left/right channel (please refer to the below picture). And most music file just have left/right channel. So if your audio file is MP3 file, there just output 1 have sound.
(2) This board is ideal for Home Theater Systems, if you play the video or watch the movies, other channel will work. You could download a mkv file to have a test.
Please refer to the '''Software Configuration''' to download the test file.
(3) If you still have doubt about this problem, please contact us.
[[Category:Product Manual]]
[[Category:Raspberry pi]]
<comments/>
[[File:X6000K-IMG-1554.jpg|thumbnail|right|400px]]
[[File:X6000-IMG-1543.jpg|thumbnail|right|400px]]
== Features of '''X6000K 7.1CH''' ==
{| class="wikitable" border="1"
|-
| For Use With
| Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
|-
| Operating System
| - OSMC - 2.0 stereo audio / 5.1 channel surround sound / 7.1 channel surround sound
- Openelec - 2.0 stereo audio / 5.1 channel surround sound / 7.1 channel surround sound
- Moode Audio Player - 2.0 stereo audio outputs
- Raspbian Jessie - 2.0 stereo audio outputs
- Rune audio - 2.0 stereo audio outputs
- Pi Core Player - To be tested
|-
| Key Features
| - Ultra-compact chassis
- Ideal for Home Theater Systems
- Ideal for 7.1 channel surround audio systems
- Used four ESS Tech Sabre premier stereo DACs ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Each DAC has independent ultra-low-jitter clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Supports up to 1TB 2.5-inch SATA hard drives
- High quality video performance
- Supports SPDIF Optical Digital Audio
- Supports HDMI high-bit-rate (HBR) audio
- 4 analog stereo 3.5mm jack outputs
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Allows you to split the audio stream from a HDMI signal
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Connects directly to the Raspberry Pi - no additional cables needed
- Powers the Raspberry Pi - no additional power supply
- Lighted power switch
- Raspberry Pi status LEDs still visible
- Access to Raspberry Pi GPIO
- Easy to change the Raspberry Pi OS SD card - No need to open the case
- Easy DIY with Raspberry Pi
|-
| Power Supply Unit (Optional Accessories)
| - AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
- With 2 snap-in plugs for North America (US) and Europe (EU)
|-
| Specification
| - Power supply: +5Vdc +/-5%
- Input Ports: 1 x HDMI
- Output Ports: 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack
- Analog audio output level: 2V RMS
- Optical S/PDIF Audio Sampling Rate: Up to 192 kHz
- HDMI Audio Format: LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby
Digital Plus Dolby TrueHD, and DTS-HD Master Audio
- Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
- Size 122mm x 90mm x 90mm
|-
| Notes
| - For use with original power supply unit only
- WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
- Approx 3 seconds delay to turn on Raspberry Pi after the power button is pressed
(The powerful HDMI audio processing chipset needs time to bootup)
|-
| Packing List
| - X6000 Metal Case x 1
- X6000-7.1CH Expansion Board Kit x 1
- X800K HDD Expansion Board Kit x 1
- Accessories kit x 1
- Tool kit x 1
|}
== Features of '''X6000K 8.0CH''' ==
{| class="wikitable" border="1"
|-
| For Use With
| Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
|-
| Operating System
| - OSMC - 8-channel L/R audio outputs
- Moode Audio Player - 8-channel L/R audio outputs
- Raspbian Jessie - 8-channel L/R audio outputs
- Openelec - To be tested
- Volumio - To be tested
- Rune audio - To be tested
- Pi Core Player - To be tested
|-
| Key Features
| - Ultra-compact chassis
- Ideal for car audio entertainment
Ideal for stage audio systems
- Ideal for multi-channel audio systems
- 8-channel stereo audio outputs at the same time even if playing 2-channel audio
- Used four ESS Tech Sabre premier stereo DACs ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Each DAC has independent ultra-low-jitter clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Supports up to 1TB 2.5-inch SATA hard drives
- High quality video performance
- Supports SPDIF Optical Digital Audio
- Supports HDMI high-bit-rate (HBR) audio
- 4 analog stereo 3.5mm jack outputs
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Allows you to split the audio stream from a HDMI signal
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Connects directly to the Raspberry Pi - no additional cables needed
- Powers the Raspberry Pi - no additional power supply
- Lighted power switch
- Raspberry Pi status LEDs still visible
- Access to Raspberry Pi GPIO
- Easy to change the Raspberry Pi OS SD card - No need to open the case
- Easy DIY with Raspberry Pi
|-
| Power Supply Unit (Optional Accessories)
| - AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
- With 2 snap-in plugs for North America (US) and Europe (EU)
|-
| Specification
| - Power supply: +5Vdc +/-5%
- Input Ports: 1 x HDMI
- Output Ports: 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack
- Analog audio output level: 2V RMS
- Optical S/PDIF Audio Sampling Rate: Up to 192 kHz
- HDMI Audio Format: LPCM 8.0CH
- Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
- Size 122mm x 90mm x 90mm
|-
| Notes
| - For use with original power supply unit only
- WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
- Approx 3 seconds delay to turn on Raspberry Pi after the power button is pressed
(The powerful HDMI audio processing chipset needs time to bootup)
|-
| Packing List
| - X6000 Metal Case x 1
- X6000-8.0CH Expansion Board Kit x 1
- X800K HDD Expansion Board Kit x 1
- Accessories kit x 1
- Tool kit x 1
|}
== Hardware installation ==
For X6000K-7.1CH DIY Kits, please refer to here: [http://www.suptronics.com/miniPCkits/x6000k-7.1ch-hardware.html Hardware installation]
For X6000K-8.0CH DIY Kits , please refer to here: [http://www.suptronics.com/miniPCkits/x6000k-8.0ch-hardware.html Hardware Installation]
== Software Configuration ==
For X6000K-7.1CH DIY Kits, please refer to here: [http://www.suptronics.com/miniPCkits/x6000-7.1ch-software.html Software Configuration]
For X6000K-8.0CH DIY Kits , please refer to here: [http://www.suptronics.com/miniPCkits/x6000-8.0CH-software.html Software Configuration]
More details please refer to [http://www.suptronics.com/miniPCkits/x6000K-7.1ch.html more detail]
== FAQ ==
Q1. What do you need to use Raspberry Pi X6000-7.1CH Expansion Board?
(1) A Raspberry Pi board
(2) A DC 5V 4A Power Supply, please refer to 5V 4A Power Supply
(3) A case for X6000(optional)
Q2. Why there is just output 1 on the board have sound?
(1) This board is 7.1 channel surround sound output, so the sound output is depended by your audio file. Because output 1 is for left/right channel (please refer to the below picture). And most music file just have left/right channel. So if your audio file is MP3 file, there just output 1 have sound.
(2) This board is ideal for Home Theater Systems, if you play the video or watch the movies, other channel will work. You could download a mkv file to have a test.
Please refer to the '''Software Configuration''' to download the test file.
(3) If you still have doubt about this problem, please contact us.
[[Category:Product Manual]]
[[Category:Raspberry pi]]
<comments/>