8,941
edits
Changes
X600
,no edit summary
[[File:IMG-7339-EN.jpg|thumb|right|X600]]
[[File:IMG-7330.jpg|thumb|right|X600]]
[[File:X600-drawing.jpg|thumb|right|X600]]
==Overview==
SupTronics X600 Expansion Board for Raspberry Pi 2 Model B / Raspberry Pi B+
==FEATURES==
Input Voltage:
*6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and SATA device
Audio & Video:
*Allows you to extract audio signals from HDMI of your Raspberry Pi
*Converts HDMI audio to digital optical or Coaxial or stereo RCA analog
*The SPDIF optical or Coaxial audio output supports all audio formats up to 5.1CH Dolby Digital 5.1CH / AC3 & DTS 5.1CH audio
*Extract digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output through its RCA style L/R analog output or earphone jack
*Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH
*Maintains surround format when converting to digital optical audio
*Supports high definition input up to 1080p@(24/60)Hz, output resolution follows input
*Supports HDMI signal amplification and equalization output for repeater function
*HDMI output supports all audio formats including more advanced Dolby Digital Plus, PCM5.1CH and beyond
SATA:
*Allows you to connect SATA devices to your Raspberry Pi
Wireless:
*Built in IR sensor (38KHz)
Misc:
*Power output socket
*Directly connected on top of the Raspberry Pi using the board GPIO header pins
*No wiring nor soldering is required
*Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
*Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
Dimensions:
*85 x 56mm (Same size as Raspberry Pi)
==Packing List==
*1 x Expansion board
*1 x HDMI to VGA connector
*1 x USB male to male connector
*1 x Pack of install screws
[[File:IMG-7335.jpg|600px|x600]]
==Document==
Official site: http://www.suptronics.com/Xseries/x600.html
<comments />
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[File:IMG-7330.jpg|thumb|right|X600]]
[[File:X600-drawing.jpg|thumb|right|X600]]
==Overview==
SupTronics X600 Expansion Board for Raspberry Pi 2 Model B / Raspberry Pi B+
==FEATURES==
Input Voltage:
*6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and SATA device
Audio & Video:
*Allows you to extract audio signals from HDMI of your Raspberry Pi
*Converts HDMI audio to digital optical or Coaxial or stereo RCA analog
*The SPDIF optical or Coaxial audio output supports all audio formats up to 5.1CH Dolby Digital 5.1CH / AC3 & DTS 5.1CH audio
*Extract digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output through its RCA style L/R analog output or earphone jack
*Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH
*Maintains surround format when converting to digital optical audio
*Supports high definition input up to 1080p@(24/60)Hz, output resolution follows input
*Supports HDMI signal amplification and equalization output for repeater function
*HDMI output supports all audio formats including more advanced Dolby Digital Plus, PCM5.1CH and beyond
SATA:
*Allows you to connect SATA devices to your Raspberry Pi
Wireless:
*Built in IR sensor (38KHz)
Misc:
*Power output socket
*Directly connected on top of the Raspberry Pi using the board GPIO header pins
*No wiring nor soldering is required
*Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
*Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
Dimensions:
*85 x 56mm (Same size as Raspberry Pi)
==Packing List==
*1 x Expansion board
*1 x HDMI to VGA connector
*1 x USB male to male connector
*1 x Pack of install screws
[[File:IMG-7335.jpg|600px|x600]]
==Document==
Official site: http://www.suptronics.com/Xseries/x600.html
<comments />
[[Category:Product Manual]]
[[Category:Raspberry pi]]