1,899
edits
Changes
X306
,no edit summary
==Features==
* Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W
* Max 5.1V 4000mA Power Backup for even the most demanding Raspberry Pi set ups
* 18650 single cell battery holder
* Upto 1000mA charging current
* Integrated battery reverse polarity protection circuit
* Integrated over current protection and over voltage protection
* Intelligent automatic charging and discharging
* 4 blue LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
* Red & green LEDs show the status of power on/off and charging status
* On-board push button to control power on /off (Press-ON, Hold the button pressed at least 3s -OFF)
* Ultra-low standby power consumption of μA to maximize battery life
* Integrated IN-to-SYS pass-through path to pass the input voltage to the system
* Advanced system power path management avoids frequent charging and extend battery life
* Connects to the Raspberry Pi via Pogo Pins - no wirindg & soldering required
* Power using USB Type-C
* 4-pin header for external power swtich and always-on power option
* Equipped with three USB2.0 ports and one USB2.0 4-through-holes for more USB expansion
==Port & ConnectorsSpecification==* Input supply voltage: 5Vdc +/-5%* Input supply current: ≥3A* Charging current: 900~1050mA* Trickle charge current: 130~140mA* Predetermined Charge voltage: 4.2V +/-1.5%
* Output voltage: 5.1V +/-5%
* Max output current: 4000mA
==How to Power==
Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X306)
==Packing List==
* 1 x X306 18650 UPS Shield
* 4 x KM2.5 x 4
==User Manual==