Changes

Linux raspberrypi 6.6.22-v8+ #1746 SMP PREEMPT Wed Mar 20 17:19:49 GMT 2024 aarch64 GNU/Linux

sudo nano /boot/firmware/config.txt

Add two lines at the end of the file that reads like this:

Press Ctrl + X to Exit

sudo reboot

v4l2-ctl --list-devices

[[File:X1300v1.0-setting3.png]]

sudo nano 1080P60EDID.txt

Copy below EDID data and paste to 1080P60EDID.txt

00000000000000000000000000000015

</pre>

v4l2-ctl -d /dev/v4l-subdev2 --set-edid=file=/home/pi/1080P60EDID.txt --fix-edid-checksums

'''PS''':Pay attention to the directory of your edid file

v4l2-ctl -d /dev/v4l-subdev2 --query-dv-timings

[[File:X1300v1.0-setting4.png]]

'''PS:'''Make sure to connect the HDMI source device to get the HDMI signal, if you can't get the correct resolution here, consider adjusting the resolution of your source device to match the EDID.

v4l2-ctl -d /dev/v4l-subdev2 --set-dv-bt-timings query

[[File:X1300v1.0-setting5.png]]

media-ctl -d /dev/media2 -r

<span class="tb_red">Please note that the /dev/media number can change. Go to step1.3 to check the media number.</span>

media-ctl -d /dev/media2 -l ''\''csi2'\'':4 -> '\''rp1-cfe-csi2_ch0'\'':0 [1]'

media-ctl -d /dev/media2 -V ''\''csi2'\'':0 [fmt:RGB888_1X24/1920x1080 field:none colorspace:srgb]'

media-ctl -d /dev/media2 -V ''\''csi2'\'':4 [fmt:RGB888_1X24/1920x1080 field:none colorspace:srgb]'

v4l2-ctl -v width=1920,height=1080,pixelformat=RGB3

v4l2-ctl --verbose -d /dev/video0 --set-fmt-video=width=1920,height=1080,pixelformat='RGB3' --stream-mmap=4 --stream-skip=3 --stream-count=2 --stream-to=csitest.yuv --stream-poll

ffplay -f rawvideo -video_size 1920x1080 -pixel_format bgr24 csitest.yuv