5,154
edits
Changes
no edit summary
{{GD Template Impl}}
This tutorial assumes you've already set up a Raspberry Pi with Raspbian12('''bookworm'''). For help installing the Debian-based OS on your Pi, check out the docs on Raspberrypi.com.
To check the kernel version, execute the following command:
Linux raspberrypi 6.6.22-v8+ #1746 SMP PREEMPT Wed Mar 20 17:19:49 GMT 2024 aarch64 GNU/Linux
* To enable the device tree overlay in the '''/boot/firmware/config.txt'''
sudo nano /boot/firmware/config.txt
Add two lines at the end of the file that reads like this:
dtoverlay=tc358743,4lane=1
dtoverlay=tc358743-audio
[[File:X1300v1.0-setting2.png|800px]]
Press Ctrl + O & Enter to save
Press Ctrl + X to Exit
* Reboot the Raspberry Pi 5 for the settings to take effect
sudo reboot
* Check video devices list
v4l2-ctl --list-devices
[[File:X1300v1.0-setting3.png]]
* Create an 1920*1080P EDID txt file to setup the HDMI to CSI adapter before you can connect it to a HDMI source. This EDID file will enable the video and audio mode supported.
sudo nano 1080P60EDID.txt
Copy below EDID data and paste to 1080P60EDID.txt
<pre>
00ffffffffffff005262888800888888
1c150103800000780aEE91A3544C9926
0F505400000001010101010101010101
010101010101011d007251d01e206e28
5500c48e2100001e8c0ad08a20e02d10
103e9600138e2100001e000000fc0054
6f73686962612d4832430a20000000FD
003b3d0f2e0f1e0a202020202020014f
020322444f841303021211012021223c
3d3e101f2309070766030c00300080E3
007F8c0ad08a20e02d10103e9600c48e
210000188c0ad08a20e02d10103e9600
138e210000188c0aa01451f01600267c
4300138e210000980000000000000000
00000000000000000000000000000000
00000000000000000000000000000015
</pre>
<!--Add review function! -->
<comments />