1,899
edits
Changes
==Features==
{| class="wikitable"
|-
| '''For use with''' ||
Raspberry Pi 5 Model B
|-
| '''Key Features''' ||
'''UPS Output'''
* Provides continuous operation for up to 6 hours (duration depends on battery type and applications)
* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
* Convenient pogo pin connection for powering the Pi, eliminating the need for cabling and soldering
'''Battery Charging'''
* Supports fast battery charging with a capacity of 3000mA
* Battery charging control can be managed via GPIO
* Provides protection against battery overcurrent and overvoltage
* Built-in protection against reverse connection of battery cells
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
* Features a 2-cell 18650 battery holder
'''Power Input'''
* <span style="color:red">Powered through the USB-C socket, eliminating the need to change your power adapter</span>
* XH2.54 connector provided for alternative power sources
'''Enhanced Power Management'''
* Seamless power switching between backup power and power adapter
* On-board push button performs the same actions as the Pi's power button
* Automatically cuts off power when the Pi is shut down
* On-board LED indicates power status and Pi detection
* AC power loss and power adapter failure detection via GPIO
* Auto power-on when power is applied or restored
* Automatic safe shutdown when battery voltage is low (programmable)
* Ultra-low standby power consumption to maximize battery life
* Advanced system power-path management to minimize frequent charging and discharging of batteries
'''Miscellaneous'''
* Connects to the Pi via convenient pogo pins, eliminating the need for additional cabling
* Designed to be attached on the bottom, allowing the use of favorite HATs alongside it
* XH2.54 connector available for adding your own power button
|-
| '''Spec''' ||
<span style="color:red">'''Power input:''' 5Vdc 5A via USB Type-C / XH2.54-2P connector</span>
'''UPS output:''' 5.1V ±5% Max 5A
'''Battery charging current:''' Max 2.3-3.2A
'''Terminal Battery Voltage:''' 4.23V
'''Battery Recharge Threshold:''' 4.1V
'''Ports & Connectors:'''
* DC power jack - 5.5x2.1mm
* 18650 battery socket x2
* 5V Power output connector x2 - XH2.54 2-pin
* External power button connector x1 - XH2.54-2P
'''PCB Size:''' 106.6mm x 85mm
|-
| '''Notes''' ||
* <span style="color:red">Do not apply power to your Raspberry Pi via the Type-C USB socket.</span>
* Do not use 18650 battery with built-in protection circuit.
|}
==Packing List==