X1100

From Geekworm Wiki
Revision as of 18:04, 29 September 2024 by Lisa (talk | contribs) (→‎Features)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

X1100 Shield v1.0
X1100 Shield + official active cooler
X1100
X1100 Shield + third party active cooler
X1100 V1.0 PCB

Overview

The X1100 shield is a 2.5 inch SATA HDD/SSD expansion board, offering an easy and fast way to create bigger storage solution for your Raspberry Pi 5. Its elegant and ultra-compact design allows 2.5" HDD/SSD to be conveniently attached to Raspberry Pi. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds. The mounting holes and standoffs help protect the hard disk drives, while effectively drawing the heat away from the drive for reliable performance. The built-in LED light indicates the reading or writing status – no more guesswork again.

The X1100 can be the perfect storage solution for your home media center and building Network-attached storage (NAS) for storing and streaming your own videos, music, and digital photos around the house and even across the world. the X1100 also supports operating system booting from your HDD/SSD for faster app opens, web serving and file copying.

Raspberry pi 5 SATA Series

Model Description Supported HDD/SSD Mounting Position Support NVMe Boot Matching Case Matching Cooler
X1100 USB to SATA 2.5" SATA HDD / SSD Bottom Yes X1100-C1 Official Cooler / H505 Active Cooler / Argon THRML Cooler / H501
X1006 PCIe to SATA 2.5" SATA HDD + M.2 SATA Key-B 2280 SSD Bottom NO NO Case yet Official Cooler / H505 Active Cooler / Argon THRML Cooler / H501
X1007 PCIe to SATA Dual SATA 2.5" HDD / SSD Bottom NO NO Case yet Official Cooler / H505 Active Cooler / Argon THRML Cooler / H501
X1008 PCIe to SATA 2.5" SATA HDD / SSD + 3.5" SATA HDD Shield Bottom NO NO Case yet Official Cooler / H505 Active Cooler / Argon THRML Cooler / H501
X1009 PCIe to SATA 5PCS 2.5" SATA HDD / SSD /3.5" SATA HDD Top NO NO Case yet Official Cooler / H505 Active Cooler / Argon THRML Cooler / H501

Features

  • Only compatible with Raspberry Pi 5
  • A storage solution for Raspberry Pi 5 - 2.5" SATA HDD/SSD Shield
  • Supports UASP
  • Supports up to 5TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD)
  • Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
  • USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi
  • Supporting booting OS from your HDD/SSD for faster app opens, web serving and file copying
  • Compatible with USB 2.0
  • USB bus-powered - only one PSU required
  • LED blue indicator indicates drive status
  • Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed
  • Mounting holes and standoffs provide mechanical stability of the Raspberry Pi and X1100 assembly
  • PCB Size: 107.5mm x 85mm

Matching Case

The X1100 case is named X1100-C1.

X1100-C1-IMG-8548-Packing-List.jpg X1100-C1-IMG-8525-interface-1.jpg X1100-C1-IMG-8529-interface-2.jpg

X1100-C1-IMG-8535-size.jpg X1100-C1-IMG-8538-layer.jpg

Test & Reviews

Before we start read/write tests on the X1100, let's test it with a Micro SD card first! Scandisk-sdcard.jpg

1. Test Micro SD card

Test Conditions

Raspberry Pi 5 Model B Rev 1.0 , 4G RAM

Operation system: Raspberry Pi OS with desktop (Debian12 (bookworm), 32bit, Release date: October 10th 2023)

Storage details: SanDisk Ultra 32GB C10 A1 level TF card

X1100-test-sdcard.png

As seen above, the final results with the dd command are:

-Write speed: 13.9 MB/s

-Read speed: 91.1 MB/s


2. Test X1100 shield

Test Conditions

System board details: Raspberry Pi 5 Model B Rev 1.0 , 4G RAM

Interface board details: X1100 V1.0 USB3.0 to SATA 6Gbs HDD/SSD shield

Operation system: Raspberry Pi OS with desktop (Debian12 (bookworm), 32bit, Release date: October 10th 2023)

Storage details: Samsung 2.5" SSD 750 EVO 120GB


Testing the SSD speed from command line with dd command

1) To test the write speed, writing 1 GB of data in 10 blocks of 100 MB.

2) To test the read speed, use dd to read our entire TestingFile file generated from the last command, in 10 blocks of 100 MB each.

X1100-DD.png

As seen above, the final results with the dd command are:

-Write speed: 392 MB/s

-Read speed: 403 MB/s


Testing disk drive read speed with hdparm

Average read rate: 371.7 MB/s (3 samples)

X1100-hdparm.jpg

Testing disk drive Read/Write speed with CrystalDiskMark on Windows

(Conect the X1100 to a Windows PC using an USB3.0 male-to-male cable)

X1100-Crystaldiskmark.png

Here are two test comparison charts:

Read-write-on-ssd-sdcard.png

Readwrite-test-on-x1100.jpg

Packing List

  • 1 x X1100 V1.0 2.5" SATA HDD/SSD Shield
  • 1 x USB 3.0 Connector
  • 4 x M2.5x14mm F/F spacers
  • 8 x M2.5x5mm screws
  • 2 x M3x8mm screws

05-X1100-Packing-List.jpg

Technical Specification

Power supply: 5Vdc +/-5% 1.3A via USB3 port

Ports & Connectors: USB socket - USB 3.0 type A, SATA HDD connector - 7P+15P

PCB Size: 107.5mm x 85mm

Important Notes

  • Recommended Geekworm HT-PD27W or Raspberry Pi official 27W USB-C Power Supply, which provides up to 5A current at +5.1V to drive your hard drives
  • If you are using a power supply that cannot provide 5A at +5V or not compatible, setting usb_max_current_enable=1 in the /boot/firmware/config.txt file will override this and increases the USB current limit to 1.6A. otherwise, it might affect USB booting or cannot provide enough power to your hard drives and SSDs .
  • The X1100, a USB 3.0 devices might generate radio frequency interference that can cause Wi-Fi and other wireless devices operating in the 2.4GHz band to have issues communicating with your Raspberry Pi5. To avoid interference on the 2.4GHz band using Wi-Fi, try using the 5GHz band instead. If problem still exists, please turn off WiFi and use the wired network instead.

User Manual

Video Guide

Installtion Video for X1100+X1100-C1: https://youtu.be/xexUztWckkA

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #3

2 months ago
Score 0++
Is it possible to connect 2 x SATA SSD 2.5"?

Lisa

2 months ago
Score 0++
Hi,please refe to X1007

Anonymous user #2

2 months ago
Score 0++

The X1100 looks really well designed. Especially a great combination with the X1100-C1 Metal Case.

It would be interesting to know whether the USB-SATA chip that is used supports the SSD function: TRIM (or UNMAP in SCSI terminology). According to the description, it is an unspecified “USB 3.1 Gen1 to SATA 6Gb/s bridge controller”, so it can at least be assumed that the controller supports the UAS (USB Attached SCSI) protocol.

Lisa

2 months ago
Score 0++
Hi, X1100 supports UASP.

Anonymous user #1

5 months ago
Score 0++
Does it work with raspberry pi 4? Thanks

Lisa

5 months ago
Score 0++
Hi,X1100 only compatible with Pi 5. if you want to use a 2.5" SATA HDD/SSD Shield with pi 4, please refer to X825 V2.0