5,154
edits
Changes
no edit summary
[[File:02-X1100-V1.0-hardware.jpg|thumb|right|X1100 V1.0 PCB]]
[[File:05-X1100-IMG-6690-Packing-List.jpg|thumb|right|X1100 V1.0 Packing List]]
==Overview==
The X1100 is a 2.5 inch SATA HDD/SSD expansion board, offering an easy and fast way to create bigger storage solution for your Raspberry Pi 5. Its elegant and ultra-compact design allows 2.5" HDD/SSD to be conveniently attached to Raspberry Pi. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds. The mounting holes and standoffs help protect the hard disk drives, while effectively drawing the heat away from the drive for reliable performance. The built-in LED light indicates the reading or writing status – no more guesswork again.
==How to Power==
Power supply: 5Vdc +/-5% 1.3A via USB3 port
==Test & Reviews==
'''Test Conditions'''
System board details: Raspberry Pi 5 Model B Rev 1.0 , 4G RAM
Interface board details: X1100 V1.0 USB3.0 to SATA 6Gbs HDD/SSD shield
Operation system: Raspberry Pi OS with desktop (Debian12 (bookworm), 32bit, Release date: October 10th 2023)
Storage details: Samsung 2.5" SSD 750 EVO 120GB
'''Testing the SSD speed from command line with <mark>dd</mark>'''
1) To test the write speed, writing 1 GB of data in 10 blocks of 100 MB.
2) To test the read speed, use dd to read our entire TestingFile file generated from the last command, in 10 blocks of 100 MB each.
==Packing List==