5,165
edits
Changes
Jump to navigation
Jump to search
{{GD Template Impl}}
[[File:X1009-V1.1-P1IMG-7801-Interface.jpg|thumb|right|X1009 V1.1]][[File:X1009-V1.1-P2P6.jpg|thumb|right|X1009 V1.1]][[File:X1009-V1.1-P3P5.jpg|thumb|right|X1009 V1.1- How to connect SATA Powre Spillter cable]]
[[File:X1009-V1.1-P4.jpg|thumb|right|X1009 V1.1]]
[[File:X1009-V1.1-P5.jpg|thumb|right|X1009 V1.1]][[File:X1009-V1.1-P6Bottom.jpg|thumb|right|X1009 V1.1]] ==Important Notes==* <span style="color:red;">NOT include 7-pin SATA data cables, please prepare it yourself</span> * The X1009 is designed for data storage purposes and <span style="color:red;">does not currently support booting from HDD/SSD</span> with the existing firmware.* <span style="color:red;">Don't</span> power the X1009 via DC powe jack and the Raspberry Pi5 via USB-C at the same time. * Older SATA drives with less efficient flash media may not perform as well as newer drives* New SATA HDDs/SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
==Overview==
The X1009 '''PCIe to 5-port SATA expansion board''' is designed to offer a high-capacity and high-speed storage solution for your Raspberry Pi 5. This board supports the simultaneous connection of <span style="color:red;">5'''5pcs'''</span> '''large-capacity SATA storage devices'''Bold text'''storage devices, with the SATA 3.0 interface reaching speeds of up to 5Gbps.
The X1009 features a 12V input via a standard DC jack and is equipped with high-efficiency DC/DC step-down converters to power both your Raspberry Pi 5 and PCIe devices concurrently, simplifying the power supply to a single source.
==Features==
* Compatible with Raspberry Pi 5B
* Supports the connection of five SATA 3.0 devices to your Raspberry Pi 5 simultaneously
* Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0
* Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0
* Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s
* Compatible with SATA 6G, 3G, and 1.5G hard drives
* Features plug-and-play installation for ease of setup
* Blue LED indicators display power and drive status
* Equipped with a high-efficiency DC/DC step-down converter to power both your Raspberry Pi 5 and SATA devices simultaneously
* Efficient power delivery to the Raspberry Pi 5 via a pin header, consolidating power sources
* Compatible with the official active cooler without compromising cooling performance
* Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down
* Includes a power SATA splitter cable for connecting up to 5 Serial ATA devices
* PCB Size: 85mm x 57.2mm
==How to Power==
* <span style="color:red;">12Vdc +/-5%</span> '''≥3A''' for one 3.5" HDD or one 2.5" HDD,
* <span style="color:red;">12Vdc +/-5%</span> '''≥5A''' for two 3.5" HDDs, '''≥7A''' for three 3.5" HDDs, '''≥9A''' for four 3.5" HDDs, '''≥11A''' for five 3.5" HDDs
* <span style="color:red;">12Vdc +/-5%</span> '''≥4A''' for two 2.5" HDDs, '''≥5A''' for three 2.5" HDDs, '''≥6A''' for four 2.5" HDDs, '''≥7A''' for five 2.5" HDDs
* Your SATA drives can also be powered from a separate PSU.
PS: According to our actual test, the [[PSU60 | Geekworm 12V/5A power supply]] can load 3-5 2.5" sata SSDs, and final power requirements depend on the requirements of the SSD/HDD you are using
==Ports & Connectors==
* DC power jack x1 - 5.5x2.1mm
* PCIe connector x1 - 16-pin pitch0.5mm
* SATA connectors x5 - 7P
==Test & Reviews==
'''Test Conditions'''
* System board details: Raspberry Pi 5 Model B Rev 1.0 , 4G RAM
* Interface board details: X1009 v1.1 PCIe to 5 SATA Shield
* Operation system: Raspberry Pi OS with desktop (Debian12 (bookworm), 64bit, Release date: December 5th 2023)
* Storage details: Samsung EVO 750 SSD, Segate Barracuda ST3500410AS 500G
'''Testing disk drives read speed at PCIe2.0 with hdparm'''
[[File:X1009-Testing-disk-drives-read-speed-at-PCIe2.0-with-hdparm.png]]
Samsung EVO SSD: 430.72MB/s, Segate Barracuba HDD: 102.65MB/s
==Packing List==
* X1009 V1.1 PCIe to SATA shield x1
* SATA power spillter cable x1
* PCIe FFC 30mm x1
* Screw pack x1
<span style="color:red;">NOTE: NOT include 7-pin SATA data cables, please prepare it yourself</span>
[[File:X1009-V1.1-IMG-7645-Packing-List-1.jpg | 700px]]
==User Manual==
* Dimensions source file (DXF): [[File:X1009-V1.0.dxf]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online
===Hardware===
[[File: X1009v1.1-dwg.png | 700px]]
[[File:X-1009-V1.1-install.jpg | 700px]]
===Software===
* X1009 software tutorials: [https://suptronics.com/Raspberrypi/Storage/x1009-v1.1_software.html X1009 Software]
<!--Add review function! -->