Changes

[[File:X1008-V1.1-p1Interface.jpg|thumb|right|X1008 V1.1]][[File:X1008-V1.1-p2Bottom.jpg|thumb|right|X1008 V1.1]][[File:X1008-V1.1-p3P1.jpg|thumb|right|X1008 V1.1]][[File:X1008-V1.1-p4p2.jpg|thumb|right|X1008 V1.1]][[File:X1008-V1.1-p5P3.jpg|thumb|right|X1008 V1.1]][[File==Important Notes==* The X1008 is designed for data storage purposes and <span style="color:red;">does not currently support booting from HDD/SSD</span> with the existing firmware.* <span style="color:red;">Don't</span> power the X1008via DC powe jack and the Raspberry Pi5 via USB-V1C at the same time.1-p6.jpg|thumb|right|X1008 V1 * Older SATA drives with less efficient flash media may not perform as well as newer drives* New SATA HDDs/SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.1]]

==Technical SpecificationHow to Power==

'''PCIe FFC cable length:''' 37mm '''PCB Size:''' 164.5mm x 101.6mm '''==Ports & Connectors:''' ==

* Dimensions source file (DXF): [[File:X1008 hardware description: -V1.0-DWG.dxf]] - You can view it with [https://suptronicsviewer.autodesk.com/Raspberrypi/Storage/x1008Autodesk Viewer] online===Hardware===[[File: x1008v1.1-dwg.png | 900px]] [[File: X1008-v1V1.1_hardware1-install.html X1008 Hardwarejpg | 900px]] ===Software===