1,899
edits
Changes
no edit summary
{{GD Template Impl}}
==Important Notes==
* The X1006 is designed for data storage purposes and <span style="color:red;">does not currently support booting from HDD/SSD</span> with the existing firmware.
* <span style="color:red;">Not compatible</span> with M.2 NVMe SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-SATA devices
* Older SATA drives with less efficient flash media may not perform as well as newer drives
* New SATA HDDs/SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
==Overview==
X1006 '''PCIe to 2 ports SATA HDD/SSD expansion board''' is designed to provide a mass-capacity storage and high-speed storage solution for your Raspberry Pi 5. This board facilitates the simultaneous connection of '''a 2.5-inch HDD''' and '''a M.2 <span style="color:red;">KEY-B</span> 2280 SSD''', unleashing the full potential of your storage capabilities, with SATA 3.0 interface speeds reaching up to 5Gbps.