2,869
edits
Changes
Jump to navigation
Jump to search
no edit summary
{{GD Template Impl}}
<big>Although this tutorial is still available, but we strongly recommend that you use [[XScript]] new tutorial, and we no longer maintain this page</big>
'''Note:''' Not tested with '''Home Assistant''', for some reason, we are not able to upgrade and use the Home Assistant to test, please pay attention to check if there is any update in the future.(If you have successfully tested Home Assistant, welcome to share your experience via email at: support@geekworm.com)
<hr/>
[Update]
Support [https://getumbrel.com/ Umbrel] now.
The script is '''not tested''' VMware ESXI ARM operating system. To make the 3pin PWM cooling fan running, please remove/pull out the yellow cableif you use X-C1 V1.3 version.Remove the jumper cap on "Fan FS" PIN of X-C1 V2.0 to let the fan running at full speed.
NOTE:
==For Raspbian / RetroPie / Twister OS v2.0.2 ==
Test this script based on the following OS:
* Tested '2022-04-04-raspios-buster-armhf.img" on Apr. 13, 2022;
* Raspbian 2021-05-07-raspios-buster-armhf, 2021-10-30-raspios-bullseye-armhf.img, 2021-10-30-raspios-bullseye-armhf-lite.img
* RetroPie 4.7.1
* Twister OS v2.0.2 / Twister OS 2.1.2
'''install'''
cd ~
sudo apt-get update
sudo apt-get -y upgrade sudo apt-get -y install i2c-tools python3-smbus python3-y git pigpio rpi.gpio sudo apt-get install -y python-pigpio python3-pigpiogit sudo apt-get install -y python-smbus pigpio python3-smbuspigpio
git clone https://github.com/geekworm-com/x-c1.git
cd x-c1
echo "alias xoff='sudo /usr/local/bin/x-c1-softsd.sh'" >> ~/.bashrc
sudo reboot
If reboot fails, please force shutdown or power off and restart
''' PWM fan control'''
sudo apt-get upgrade
sudo apt-get install -y unzip make gcc python git wiringpi python3-pigpio python-setuptoolspython3-rpi.gpio
sudo apt-get install -y python3-distutils
About myNode, please refer to http://www.mynodebtc.com/
About Umbrel, please refetrto refer to https://getumbrel.com/
'''Install'''
Login to mynode teminal via Putty or Xsheel tool, the default user name is `admin`, default password is `bolt`, then run the following command:
Login to mynode Umbrel teminal via Putty or Xsheel tool, the default user name is `umbrel`, default password is `moneyprintergobrrr`, then run the following command:
'''FAQ'''
== For DietPi==
About DietPi, please refer to [https://dietpi.com/ URL]
Test 'DietPi_RPi-ARMv6-Bullseye.image' on May 5th, 2022.
'''Install'''
<pre>
sudo apt-get update
sudo apt-get install git pigpio python pythonpigpiod python3-pigpio pythonpython3-smbus wiringpi python3-rpi.gpio -y
git clone https://github.com/geekworm-com/x-c1
cd x-c1
return to [[NASPi]]
==For Volumio ==
Test this script based on the following OS:
* Volumio-3.175-2021-12-13-pi.img
'''install'''
cd ~
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install -y git pigpio
sudo apt-get install -y python-pigpio python3-pigpio
sudo apt-get install -y python-smbus python3-smbus
git clone https://github.com/geekworm-com/x-c1.git
cd x-c1
sudo chmod +x *.sh
sudo bash volumio.sh
echo "alias xoff='sudo /usr/local/bin/x-c1-softsd.sh'" >> ~/.bashrc
sudo reboot
''' PWM fan control'''
The script is installed successfully and the fan starts to run
'''Test safe shutdown'''
xoff
* Please run 'xoff' to shut down or press the on-board button switch to shut down. <span style="color:red;">DON'T run the 'shutdown' linux command to shut down, otherwise the power of X-C1 will not be shut down.</span>
* press button switch `1-2` seconds to reboot
* press button switch `3` seconds to safe shutdown,
* press `7-8` seconds to force shutdown.
'''uninstall'''
<pre>
sudo ./uninstall.sh
</pre>
'''Note'''
<pre>
Enable SSH:
http://volumio.local/dev/
Name: volumio
Password: volumio
</pre>
we use the default password to run the volumio.sh, please replace default password 'volumio' with your new password in volumio.sh file .(Line 72)
==FAQ==
Q1: Can't connect to pigpio at localhost(8888)
<pre>
Can't connect to pigpio at localhost(8888)
Did you start the pigpio daemon? E.g. sudo pigpiod
Did you specify the correct Pi host/port in the environment
variables PIGPIO_ADDR/PIGPIO_PORT?
E.g. export PIGPIO_ADDR=soft, export PIGPIO_PORT=8888
Did you specify the correct Pi host/port in the
pigpio.pi() function? E.g. pigpio.pi('soft', 8888)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Traceback (most recent call last):
File "/home/volumio/x-c1/fan.py", line 8, in <module>
pwm.set_mode(servo, pigpio.OUTPUT)
File "/usr/lib/python2.7/dist-packages/pigpio.py", line 1376, in set_mode
return _u2i(_pigpio_command(self.sl, _PI_CMD_MODES, gpio, mode))
File "/usr/lib/python2.7/dist-packages/pigpio.py", line 1025, in _pigpio_command
sl.s.send(struct.pack('IIII', cmd, p1, p2, 0))
AttributeError: 'NoneType' object has no attribute 'send'
</pre>
A: If you find an error similar to the above, it is because pigpiod library is not started, we need to run pigpiod first,
sudo pigpiod
python 'your directory'/x-c1/fan.py &
If 'sudo' command request a password, you can use the following command:
echo 'your password' | sudo -S pigpiod
python 'your directory'/x-c1/fan.py &
You can put these two lines in the /etc/rc.local file so that it will run automatically after booting.
[[File:Volumio-rc-local.jpg|800px]]
Q2:How to get the current fan speed value? As I remember old x735 software where with such read_fan_speed.py script example, but not found such in X-C1.
A: The X-C1's PWM fan is a 3Pin FAN, and does not support reading speed. The Fan of X735 is a 4Pin PWM fan.
<hr/>
<!--Add review function! -->
<comments />
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[Category:Knowledge]]