5,154
edits
Changes
no edit summary
# Make sure the SSD type you use is correct, only support <span class="tb_red">M.2 NVME (Sata) Key-M SSD '''</span>NOT support''' M.2 NGFF Key-B SSD. Refer to the following diagram (click it to zoom out): [[File:Supported-SSD-1.jpg|100px]]
# Make sure the FPC cable is '''firmly and fully inserted''' into the PI 5, this is '''very important'''. For [[X1003]] shield, make sure the FPC cable '''direction''' is correct also.
# <span class="tb_red_bold">For [[X1003]] shield, make sure the FPC cable '''direction''' is correct also. If an error still occurs, replace the FFC cable to test or purchase other PFC from here<ref>Amazon US: https://www.amazon.com/dp/B0CXCTPQ2N<br/ref><ref>Amazon DE: https://www.amazon.de/dp/B0CX4T993J<br/ref><ref>Amazon UK: https://www.amazon.co.uk/dp/B0CX4T993J<br/>Amazon JP: https://www.amazon.co.jp/dp/B0CYGKN7G1</ref>to troubleshoot the issue.<span>
# Although you can also boot from a SD card, Pi OS is required for the NVMe SSD to boot, DON'T forget Flash OS into NVMe SSD.
# If you're flashing a fresh Pi OS into NVME SSD , DON'T forget to '''ENABLE PCIe''' to NVME SSD.