Temperature and Humidity Wifi Switch

From Geekworm Wiki
Jump to navigation Jump to search
Temperature Humidity Smart Wi-Fi Switch w/ Sensor (sku:463777 463778)

Temperature Humidity Smart Wi-Fi Switch
Temperature Humidity Smart Wi-Fi Switch w/ Sensor (sku:464409 464412)

Overview

This WIFI switch have 2 wide voltage input voltage, AC/DC 85V-220V and 7V~32V; output the switch signal to control your device , it can control the range of temperature and humidity, to achieve the automatic control of your home appliance,and monitoring the temperature and humidity.

Features

  • Input: AC/DC 85V-220V or 7V~32V;
  • Constant temperature and humidity control
  • Jog, self-locking dual mode
  • Share function
  • Timing function
  • Time delay function
  • Phone APP automatic or manual mode control
  • Phone APP automatic mode: controll by setting the maximum temperature and minimum temperature

PS: what's Jog mode?

what's self0locking mode?

APP Downlaod

Or please scan the QRCode with your mobile phone

20161019102654.jpg

Application scene

  • Electric Fireplace
  • electric heater
  • carbon crystal heating
  • electric warming fan
  • electrical oil heater
  • greenhouse etc.

APP-12.jpg

This is APP control interface for you to set Auto mode or Manual mode.

APP-34.jpg

Enter this interface you can set the temperature and humidity.

Lower than 22℃ Button grey means when temperature is lower than 22℃, the switch controller will stop working.

Higher than 26℃ Button blue means when temperature is higher than 26℃, the switch controller will start working.

The humidity control is the same principle as above.

You can comtrol the temperature and humidity as you wish, very convenient.

[Device Setting]

Enter this interface you can control the Power on Switch State, usually we keep it "OFF".

Temperature and Humidity Sensor Specifications

  • Measurement range:
  • Temperature: -40 - +80℃
  • Humidity: 0 - 99.9%RH
  • Accuracy(in 25℃):
  • Temperature: ±0.5℃
  • Humidity: ±3%RH (10...90%RH)

Sensor Specification

  • Temperature: resistive transducer
  • Humidity: capacitive transducer
  • Working temperature range: -40 - +80℃
  • Plower supply: DC 3.1V-5.5V
  • Output: digital (1 wire)
  • Case material: ABS
  • Weight: 14g